[1] ATTWOOD TE, DAWSON PC, FREEMAN JL, et al. Synthesis and Properties of Polyaryletherketones. Polymer. 1981;22(8): 1096-1103.
[2] KURTZ SM, DEVINE JN. PEEK biomaterials in trauma, orthopedic, and spinal implants. Biomaterials. 2007;28(32):4845-4869.
[3] KHOURY J, MAXWELL M, CHERIAN R E, et al. Enhanced bioactivity and osseointegration of PEEK with accelerated neutral atom beam technology. J Biomed Mater Res B Appl Biomater. 2017; 105(3): 531-543.
[4] 孙永周.开展我国聚醚酮酮研究的建议[J].塑料工业,1990,8(2): 25-31.
[5] 李云龙,孙丰春,贾远超,等.高性能材料聚醚酮酮的生产、应用[J].塑料工业,2012,40(5):11-12,64.
[6] 邓德鹏,陈志远,李云龙,等.新型特种工程塑料聚醚酮酮的研究及应用进展[J].工程塑料应用,2014,42(12):127-130.
[7] 杨雪勤,吴健,厉从雷,等.聚醚酮酮/羟基磷灰石复合植入物的力学性能与生物活性[J].功能高分子学报,2019,32(5):626-632.
[8] 孔凡,许鑫华,李景庆.高性能航天航空材料—聚醚酮酮[J].塑料科技,2001(3):8-10.
[9] WU D, ISAKSSON P, FERGUSON SJ, et al. Young’s modulus of trabecular bone at the tissue level: A review. Acta Biomater. 2018;78:1-12.
[10] KINNEY JH, BALOOCH M, MARSHALL SJ, et al. Hardness and Young’s modulus of human peritubular and intertubular dentine. Arch Oral Biol. 1996;41(1): 9-13.
[11] LIN Y, UMEBAYASHI M, ABDALLAH MN, et al. Combination of polyetherketoneketone scaffold and human mesenchymal stem cells from temporomandibular joint synovial fluid enhances bone regeneration. Sci Rep. 2019;9(1):472.
[12] SMITH GW, ROBINSON RA. The Treatment of Certain Cervical-Spine Disorders by Anterior Removal of the Intervertebral Disc and Interbody Fusion. J Bone Joint Surg Am. 1958;40(3):607-624.
[13] MALLOY KM, HILIBRAND AS. Autograft versus allograft in degenerative cervical disease. Clin Orthop Relat Res. 2002;(394):27-38.
[14] KOEHLER S, RASLAN F, STETTER C, et al. Autologous bone graft versus PEKK cage for vertebral replacement after 1- or 2-level anterior median corpectomy. J Neurosurg Spine. 2016;24(2):309-314.
[15] MOORE R, BEREDJIKLIAN P, RHOAD R, et al. A comparison of the inflammatory potential of particulates derived from two composite materials. J Biomed Mater Res. 1997;34(2):137-147.
[16] SLOTEN JV, LABEY L, VAN AUDEKERCKE R, et al. Materials selection and design for orthopaedic implants with improved long-term performance. Biomaterials. 1998;19(16):1455-1459.
[17] CONVERSE GL, CONRAD TL, ROEDER RK. Mechanical properties of hydroxyapatite whisker reinforced polyetherketoneketone composite scaffolds. J Mech Behav Biomed Mater. 2009;2(6):627-635.
[18] CONVERSE GL, CONRAD TL, MERRILL CH, et al. Hydroxyapatite whisker-reinforced polyetherketoneketone bone ingrowth scaffolds. Acta Biomater. 2010;6(3):856-863.
[19] GAMIE Z, TRAN GT, VYZAS G, et al. Stem cells combined with bone graft substitutes in skeletal tissue engineering. Expert Opin Biol Th. 2012; 12(6):713-729.
[20] GUAN M, YAO W, LIU RW, et al. Directing mesenchymal stem cells to bone to augment bone formation and increase bone mass. Nat Med. 2012;18(3):456-462.
[21] WANG P, LIU X, ZHAO L, et al. Bone tissue engineering via human induced pluripotent, umbilical cord and bone marrow mesenchymal stem cells in rat cranium. Acta Biomater. 2015;18:236-248.
[22] PITTENGER MF, MACKAY AM, BECK SC, et al. Multilineage potential of adult human mesenchymal stem cells. Science. 1999;284(5411):143-147.
[23] ADAMZYK C, KACHEL P, HOSS M, et al. Bone tissue engineering using polyetherketoneketone scaffolds combined with autologous mesenchymal stem cells in a sheep calvarial defect model. J Craniomaxillofac Surg. 2016;44(8):985-894.
[24] WANG P, ZHAO L, CHEN W, et al. Stem Cells and Calcium Phosphate Cement Scaffolds for Bone Regeneration. J Dent Res. 2014; 93(7): 618-625.
[25] XING Z, PEDERSEN TO, WU XJ, et al. Biological Effects of Functionalizing Copolymer Scaffolds with Nanodiamond Particles. Tissue Eng Pt A. 2013;19(15-16):1783-1791.
[26] ROSKIES MG, FANG D, ABDALLAH MN, et al. Three-dimensionally printed polyetherketoneketone scaffolds with mesenchymal stem cells for the reconstruction of critical-sized mandibular defects. Laryngoscope. 2017;127(11):E392-E398.
[27] YUAN B, CHENG Q, ZHAO R, et al. Comparison of osteointegration property between PEKK and PEEK: Effects of surface structure and chemistry. Biomaterials. 2018;170:116-126.
[28] WU H, LIU T, XU Z, et al. Enhanced bacteriostatic activity, osteogenesis and osseointegration of silicon nitride/polyetherketoneketone composites with femtosecond laser induced micro/nano structural surface. Appl Mater Today. 2020; 18.https://doi.org/10.1016/j.apmt. 2019.100523
[29] KURTZ SM, ONG KL, LAU E, et al. Prosthetic Joint Infection Risk after TKA in the Medicare Population. Clin Orthop Relat Res. 2010;468(1):52-56.
[30] GWAM CU, MISTRY JB, MOHAMED NS, et al. Current Epidemiology of Revision Total Hip Arthroplasty in the United States: National Inpatient Sample 2009 to 2013. J Arthroplasty. 2017;32(7):2088-2092.
[31] SMITH JS, SHAFFREY CI, SANSUR CA, et al. Rates of Infection After Spine Surgery Based on 108,419 Procedures A Report from the Scoliosis Research Society Morbidity and Mortality Committee. Spine (Phila Pa 1976). 2011;36(7):556-563.
[32] WANG M, BHARDWAJ G, WEBSTER TJ. Antibacterial properties of PEKK for orthopedic applications. Int J Nanomedicine. 2017;12:6471-6476.
[33] TANNOUS F, STEINER M, SHAHIN R, et al. Retentive forces and fatigue resistance of thermoplastic resin clasps. Dent Mater. 2012;28(3): 273-278.
[34] FUHRMANN G, STEINER M, FREITAG-WOLF S, et al. Resin bonding to three types of polyaryletherketones (PAEKs)-durability and influence of surface conditioning. Dent Mater. 2014;30(3):357-363.
[35] LEE KS, SHIN SW, LEE SP, et al. Comparative Evaluation of a Four-Implant-Supported Polyetherketoneketone Framework Prosthesis: A Three-Dimensional Finite Element Analysis Based on Cone Beam Computed Tomography and Computer-Aided Design. Int J Prosthodont. 2017;30(6):581-585.
[36] DAWSON JH, HYDE B, HURST M, et al. Polyetherketoneketone (PEKK), a framework material for complete fixed and removable dental prostheses: A clinical report. J Prosthet Dent. 2018;119(6):867-872.
[37] HAN KH, LEE J Y, SHIN SW. Implant- and Tooth-Supported Fixed Prostheses Using a High-Performance Polymer (Pekkton) Framework. Int J Prosthodont. 2016;29(5):451-454.
[38] VALLITTU PK, KOKKONEN M. Deflection Fatigue of Cobalt-Chromium, Titanium, and Gold Alloy Cast Denture Clasp. J Prosthet Dent. 1995; 74(4):412-419.
[39] KLUR T, HASAN I, OTTERSBACH K, et al. PEKK-made indirect temporary crowns and bridges: a clinical pilot study. Clin Oral Investig. 2019;23(2): 771-777.
[40] LEE KS, SHIN MS, LEE JY, et al. Shear bond strength of composite resin to high performance polymer PEKK according to surface treatments and bonding materials. J Adv Prosthodont.2017;9(5):350-357.
[41] LABRIAGA W, SONG SY, PARK JH, et al. Effect of non-thermal plasma on the shear bond strength of resin cements to Polyetherketoneketone (PEKK). J Adv Prosthodont. 2018;10(6):408-414.
[42] FOKAS G, GUO CY, TSOI JKH. The effects of surface treatments on tensile bond strength of polyether-ketone-ketone (PEKK) to veneering resin. J Mech Behav Biomed Mater. 2019;93:1-8.
[43] 沈昕,王琛玮,陈晞,等.聚醚酮酮不同表面处理方式对其与饰面树脂粘接强度的影响[J].实用口腔医学杂志,2020,36(2):298-302.
[44] SONG CH, CHOI JW, JEON YC, et al. Comparison of the Microtensile Bond Strength of a Polyetherketoneketone (PEKK) Tooth Post Cemented with Various Surface Treatments and Various Resin Cements. Materials (Basel, Switzerland). 2018;11(6):916.
[45] PASSIA N, GHAZAL M, KERN M. Long-term retention behaviour of resin matrix attachment systems for overdentures. J Mech Behav Biomed Mater. 2016;57:88-94.
[46] CHOI JW, YUN BH, JEONG CM, et al. Retentive Properties of Two Stud Attachments with Polyetherketoneketone or Nylon Insert in Mandibular Implant Overdentures. Int J Oral Maxillofac Implants. 2018;33(5): 1079-1088.
[47] KOTTHAUS M, HASAN I, KEILIG L, et al. Investigation of the retention forces of secondary telescopic crowns made from Pekkton(R) ivory in combination with primary crowns made from four different dental alloys: an in vitro study. Biomed Tech (Berl). 2019;64(5):555-562.
[48] KEWEKORDES T, WILLE S, KERN M. Wear of polyetherketoneketone (PEKK) caused by different antagonists. Dent Mater.2014; 30(S1):e77.
[49] GRENADE C, MAINJOT A, VANHEUSDEN A. Fit of Single Tooth Zirconia Copings: Comparison between Various Manufacturing Processes. J Prosthet Dent. 2011;105(4):249-255.
[50] BAE SY, PARK JY, JEONG ID, et al. Three-dimensional analysis of marginal and internal fit of copings fabricated with polyetherketoneketone (PEKK) and zirconia. J Prosthodont Res. 2017;61(2):106-112.
[51] LEE KS, SHIN JH, KIM JE, et al. Biomechanical Evaluation of a Tooth Restored with High Performance Polymer PEKK Post-Core System: A 3D Finite Element Analysis. Biomed Res Int. 2017;2017:1373127.
[52] WONG RCW, TIDEMAN H, KIN L, et al. Biomechanics of mandibular reconstruction: a review. Int J Oral Maxillofac Surg. 2009;39(4):313-319.
[53] WILDE F, WINTER K, KLETSCH K, et al. Mandible reconstruction using patient-specific pre-bent reconstruction plates: comparison of standard and transfer key methods. Int J Comput Ass Rad. 2015;10(2):129-140.
[54] BATTAGLIA S, RICOTTA F, MAIOLO V, et al. Computer-assisted surgery for reconstruction of complex mandibular defects using osteomyocutaneous microvascular fibular free flaps: Use of a skin paddle-outlining guide for soft-tissue reconstruction. A technical report. J Cranio Maxill Surg. 2019;47(2):293-299.
[55] BODARD AG, SALINO S, DESOUTTER A, et al. Assessment of functional improvement with implant-supported prosthetic rehabilitation after mandibular reconstruction with a microvascular free fibula flap: A study of 25 patients. J Prosthet Dent. 2015;113(2):140-145.
[56] CHENG KJ, LIU YF, WANG R, et al. Topological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction. J Mech Behav Biomed Mater. 2020;107:103758.
|