[1] Glyn-Jones S, Palmer AJ, Agricola R, et al. Osteoarthritis. Lancet. 2015;386(9991):376-387.[2] Kurtz S, Ong K, Lau E, et al. Projections of primary and revision hip and knee arthroplasty in the United States from 2005 to 2030. J Bone Joint Surg Am. 2007;89(4):780-785.[3] Krackow KA, Mihalko WM. The effects of severe femoral bone loss on the flexion extension joint space in revision total knee arthroplasty: a cadaveric analysis and clinical consequences. Orthopedics. 2001;24(2):121-126.[4] Panegrossi G, Ceretti M, Papalia M, et al. Bone loss management in total knee revision surgery. Int Orthop. 2014;38(2):419-427.[5] Harris AI, Poddar S, Gitelis S, et al. Arthroplasty with a composite of an allograft and a prosthesis for knees with severe deficiency of bone. J Bone Joint Surg Am. 1995;77(3):373-386.[6] Mulhall KJ, Ghomrawi HM, Engh GA, et al. Radiographic prediction of intraoperative bone loss in knee arthroplasty revision. Clin Orthop Relat Res. 2006;446:51-58.[7] Reish TG, Clarke HD, Scuderi GR, et al. Use of multi-detector computed tomography for the detection of periprosthetic osteolysis in total knee arthroplasty. J Knee Surg.2006;19(4): 259-264.[8] Rand JA. Bone deficiency in total knee arthroplasty. Use of metal wedge augmentation. Clin Orthop Relat Res. 1991;(271):63-71.[9] Bargar WL, Murzic WJ, Taylor JK, et al. Management of bone loss in revision total hip arthroplasty using custom cementless femoral components. J Arthroplasty. 1993;8(3):245-252.[10] Engh GA, Parks NL. The management of bone defects in revision total knee arthroplasty. Instr Course Lect. 1997;46: 227-236.[11] Engh GA, Ammeen DJ. Classification and preoperative radiographic evaluation: knee. Orthop Clin North Am. 1998;29(2): 205-217.[12] Sugita T, Aizawa T, Sasaki A, et al. Autologous morselised bone grafting for medial tibial defects in total knee arthroplasty. J Orthop Surg (Hong Kong). 2015;23(2):185-189.[13] Sugita T, Aizawa T, Miyatake N, et al. Preliminary results of managing large medial tibial defects in primary total knee arthroplasty: autogenous morcellised bone graft. Int Orthop. 2017;41(5):931-937.[14] 马喜洪,马建军,邵芳,等.自体打压植骨法在胫骨平台骨缺损膝关节置换术中的应用[J].临床骨科杂志, 2013,16(1):18-19.[15] 王金良,孙京涛,李玲,等.骨水泥联合螺钉修复全膝关节置换术中胫骨平台内侧骨缺损[J].中医正骨, 2015,27(12):55-56.[16] Kharbanda Y, Sharma M. Autograft reconstructions for bone defects in primary total knee replacement in severe varus knees. Indian J Orthop. 2014;48(3):313-318.[17] 左健,康建敏,潘乐. 同种异体骨移植用于骨缺损修复的应用现状[J]. 中国组织工程研究, 2012,16(18):3395-3398.[18] 胡忠洲,王韶进,刘文广,等. 自体混合植骨治疗初次全膝关节置换术中RandC型骨缺损的疗效[J]. 山东大学学报(医学版), 2012,50(11): 96-99.[19] Hoell S, Sieweke A, Gosheger G, et al. Eradication rates, risk factors, and implant selection in two-stage revision knee arthroplasty: a mid-term follow-up study. J Orthop Surg Res, 2016,11(1):93.[20] Vasso M, Beaufils P, Cerciello S, et al. Bone loss following knee arthroplasty: potential treatment options. Arch Orthop Trauma Surg, 2014,134(4):543-553.[21] Hockman DE, Ammeen D, Engh GA. Augments and allografts in revision total knee arthroplasty: usage and outcome using one modular revision prosthesis. J Arthroplasty.2005;20(1):35-41.[22] Frehill B, Crocombe AD, Agarwal Y, et al. Finite element assessment of block-augmented total knee arthroplasty. Comput Methods Biomech Biomed Engin. 2015;18(15):1726-1736.[23] 张志强,贾永社,李栋,等.髁限制性膝关节假体治疗严重膝内翻畸形合并胫骨平台内侧骨缺损[J].实用骨科杂志, 2012,18(10):894-897.[24] Lee JK, Choi CH. Management of tibial bone defects with metal augmentation in primary total knee replacement: a minimum five-year review. J Bone Joint Surg Br. 2011;93(11):1493-1496.[25] Tsukada S, Wakui M, Matsueda M. Metal block augmentation for bone defects of the medial tibia during primary total knee arthroplasty. J Orthop Surg Res.2013;8:36.[26] Patel JV, Masonis JL, Guerin J, et al. The fate of augments to treat type-2 bone defects in revision knee arthroplasty. J Bone Joint Surg Br. 2004;86(2):195-199.[27] Stuchin SA. Allografting in total knee replacement arthroplasty. Semin Arthroplasty.1993;4(2):117-122.[28] Brooks PJ, Walker PS, Scott RD. Tibial component fixation in deficient tibial bone stock. Clin Orthop Relat Res. 1984;(184): 302-308.[29] Ritter MA. Screw and cement fixation of large defects in total knee arthroplasty. J Arthroplasty.1986;1(2):125-129.[30] Ritter MA, Harty LD. Medial screws and cement: a possible mechanical augmentation in total knee arthroplasty. J Arthroplasty. 2004;19(5):587-589.[31] Ritter MA, Harty LD, Davis KE, et al. Simultaneous bilateral, staged bilateral, and unilateral total knee arthroplasty. A survival analysis. J Bone Joint Surg Am. 2003;85-A(8):1532-1537.[32] Sculco PK, Abdel MP, Hanssen AD, et al. The management of bone loss in revision total knee arthroplasty: rebuild, reinforce, and augment. Bone Joint J. 2016;98-B(1 Suppl A):120-124.[33] Panni AS, Vasso M, Cerciello S. Modular augmentation in revision total knee arthroplasty. Knee Surg Sports Traumatol Arthrosc. 2013;21(12):2837-2843.[34] Heesterbeek PJ, Wymenga AB, van Hellemondt GG. No difference in implant micromotion between hybrid fixation and fully cemented revision total knee arthroplasty: a randomized controlled trial with radiostereometric analysis of patients with mild-to-moderate bone loss. J Bone Joint Surg Am. 2016;98(16): 1359-1369.[35] Kosse NM, van Hellemondt GG, Wymenga AB, et al. Comparable stability of cemented vs press-fit placed stems in revision total knee arthroplasty with mild to moderate bone loss: 6.5-year results from a randomized controlled trial with radiostereometric analysis. J Arthroplasty. 2017;32(1):197-201.[36] Gofton WT, Tsigaras H, Butler RA, et al. Revision total knee arthroplasty: fixation with modular stems. Clin Orthop Relat Res. 2002;(404):158-168.[37] 来志超,蒋超,葛怡宁,等.全膝关节置换翻修术的假体选择[J]. 中华骨与关节外科杂志, 2015,8(4):359-362.[38] Wang JW, Hsu CH, Huang CC, et al. Reconstruction using femoral head allograft in revision total knee replacement: an experience in Asian patients. Bone Joint J. 2013;95-B(5):643-648.[39] Clatworthy MG, Ballance J, Brick GW, et al. The use of structural allograft for uncontained defects in revision total knee arthroplasty. A minimum five-year review. J Bone Joint Surg Am. 2001;83-A(3): 404-411.[40] Backstein D, Safir O, Gross A. Management of bone loss: structural grafts in revision total knee arthroplasty. Clin Orthop Relat Res. 2006;446:104-112.[41] Black J. Biological performance of tantalum. Clin Mater. 1994; 16(3):167-173.[42] Girerd D, Parratte S, Lunebourg A, et al. Total knee arthroplasty revision with trabecular tantalum cones: Preliminary retrospective study of 51 patients from two centres with a minimal 2-year follow-up. Orthop Traumatol Surg Res. 2016;102(4):429-433.[43] Brown NM, Bell JA, Jung EK, et al. The use of trabecular metal cones in complex primary and revision total knee arthroplasty. J Arthroplasty. 2015;30(9 Suppl):90-93.[44] Fedorka CJ, Chen AF, Pagnotto MR, et al. Revision total knee arthroplasty with porous-coated metaphyseal sleeves provides radiographic ingrowth and stable fixation. Knee Surg Sports Traumatol Arthrosc. 2017.[45] Kamath AF, Lewallen DG, Hanssen AD. Porous tantalum metaphyseal cones for severe tibial bone loss in revision knee arthroplasty: a five to nine-year follow-up. J Bone Joint Surg Am. 2015;97(3):216-223.[46] van Hamersveld KT, Marang-van de Mheen PJ, Tsonaka R, et al. Fixation and clinical outcome of uncemented peri-apatite-coated versus cemented total knee arthroplasty : five-year follow-up of a randomised controlled trial using radiostereometric analysis (RSA).Bone Joint J. 2017;99-B(11):1467-1476.[47] Nelson CL, Vanushkina M, Irgit K, et al. Stemmed femoral implants show lower failure rates in revision total knee arthroplasty. Knee. 2015;22(5):429-434.[48] Lachiewicz PF, Soileau ES. A 30-mm cemented stem extension provides adequate fixation of the tibial component in revision knee arthroplasty. Clin Orthop Relat Res. 2015;473(1):185-189.[49] Nadorf J, Kinkel S, Gantz S, et al. Tibial revision knee arthroplasty with metaphyseal sleeves: The effect of stems on implant fixation and bone flexibility. PLoS One. 2017;12(5):e177285.[50] Berend ME, Ritter MA, Keating EM, et al. Use of screws and cement in primary TKA with up to 20 years follow-up. J Arthroplasty. 2014;29(6):1207-1210.[51] Beckmann NA, Mueller S, Gondan M, et al. Treatment of severe bone defects during revision total knee arthroplasty with structural allografts and porous metal cones-a systematic review. J Arthroplasty. 2015;30(2):249-253.[52] Garcia RM, Kraay MJ, Conroy-Smith PA, et al. Management of the deficient patella in revision total knee arthroplasty. Clin Orthop Relat Res. 2008;466(11):2790-2797.[53] Masri BA, Meek RM, Greidanus NV, et al. Effect of retaining a patellar prosthesis on pain, functional, and satisfaction outcomes after revision total knee arthroplasty. J Arthroplasty. 2006;21(8): 1169-1174.[54] Ries MD, Cabalo A, Bozic KJ, et al. Porous tantalum patellar augmentation: the importance of residual bone stock. Clin Orthop Relat Res. 2006;452:166-170.[55] Busfield BT, Ries MD. Whole patellar allograft for total knee arthroplasty after previous patellectomy. Clin Orthop Relat Res. 2006;450:145-149.[56] Rorabeck CH, Mehin R, Barrack RL. Patellar options in revision total knee arthroplasty. Clin Orthop Relat Res. 2003;(416):84-92.[57] Maheshwer CB, Mitchell E, Kraay M, et al. Revision of the patella with deficient bone using a biconvex component. Clin Orthop Relat Res. 2005;440:126-130.[58] Seo JG, Moon YW, Lim SJ, et al. Augmentation with transcortical wiring of an onlay-type prosthesis for a deficient patella during revision total knee arthroplasty. Clin Orthop Surg. 2012;4(2): 163-166.[59] Gililland JM, Swann P, Pelt CE, et al. What Is the role for patelloplasty with Gullwing osteotomy in revision TKA? Clin Orthop Relat Res. 2016;474(1):101-106.[60] Nasser S, Poggie RA. Revision and salvage patellar arthroplasty using a porous tantalum implant. J Arthroplasty. 2004;19(5): 562-572.[61] Qiu YY, Yan CH, Chiu KY, et al. Review article: bone defect classifications in revision total knee arthroplasty. J Orthop Surg (Hong Kong). 2011;19(2):238-243.[62] Luo W, Huang L, Liu H, et al. Customized knee prosthesis in treatment of giant cell tumors of the proximal tibia: application of 3-dimensional printing technology in surgical design. Med Sci Monit. 2017;23:1691-1700. |