[1] Keaveny TM, Morgan EF, Niebur GL, et al. Biomechanics of trabecular bone. Annu Rev Biomed Eng. 2001;3:307-333.[2] Reilly DT, Burstein AH. The Mechanical properties of cortical bone. J Bone Joint Surg Am. 1974;56:1001-1022.[3] Ozcivici E, Ferreri S, Qin YX, et al. Determination of bone’s mechanical matrix properties by nanoindentatio. Methods Mol Biol. 2008;455:323-334.[4] Helgason B, Perilli E, Schileo E, et al. Mathematical relationships between bone density and mechanical properties: A literature review. Clin Biomech. 2008;23:135-146.[5] Keaveny TM, Pinilla TP, Crawford RP, et al. Systematic and random errors in compression testing of trabecular bone. J Orthop Res. 1997;15:101-110.[6] Linde F, Gøthgen CB, Hvid I, et al. Mechanical properties of trabecular bone by a non-destructive compression testing approach. Eng Med. 1988;17(1):23-29.[7] Turner CH, Burr DB. Basic biomechanical measurements of bone: a tutorial. Bone. 1993;14(4):595-608.[8] Aspden RM. Mechanical testing of bone ex vivo. Methods Mol Med. 2003;80:369-379.[9] Beaupied H, Lespessailles E, Benhamou CL. Evaluation of macrostructural bone biomechanics. Joint Bone Spine. 2007; 74:233-239.[10] Chen XM, Zhao YF. Huaxi Yike Daxue Xuebao. 1991; 22(2): 171-174. 陈新民,赵云凤.人体下颌骨的偏轴应力-应变关系研究[J].华西医科大学学报,1991,22(2):171-174.[11] Wirtz DC, Schiffers N, Pandorf T, et al. Critical evaluation of known bone material properties to realize anisotropic FE-simulation of the proximal femur. J Biomech. 2000;33 (10):1325-1330.[12] Ohman C, Baleani M, Perilli E, et al. Mechanical testing of cancellous bone from the femoral head:experimental errors due to off-axis measurements. J Biomech. 2007;40(11): 2426-2433.[13] Harrigan TP,Jasty M,Mann RW,et al. Limitations of the continuum assumption in cancellous bone. J Biomech. 1988; 21:269-275.[14] Linde F,Hvid I,Madsen F. The effect of specimen geometry on the mechanical behaviour of trabecular bone specimens. J Biomech. 1992;25:359-368.[15] Keaveny TM,Borchers RE,Gibson LJ,et al. Theoretical analysis of the experimental artifact in trabecular bone compressive modulus. J Biomech. 1993;26(9):599-607.[16] Keaveny TM, Borchers RE, Gibson LJ, et al. Trabecular bone modulus and strength can depend on specimen geometry. J Biomech. 1993;26(8):991-995.[17] Lievers WB, Waldman SD, Pilkey AK. Minimizing specimen length in elastic testing of end-constrained cancellous bone. J Mech Behav Biomed Mater. 2010;3(1):22-30.[18] Lievers WB, Petryshyn AC, Poljsak AS, et al. Specimen diameter and “side artifacts” in cancellous bone evaluated using end-constrained elastic tension. Bone. 2010;47: 371-377.[19] Feng L, Jasiuk I. Effect of specimen geometry on tensile strength of cortical bone. J Biomed Mater Res Part A. 2010; 95A(20):580-587.[20] Carter DR, Caler WE, Spengler DM, et al. Fatigue behavior of adult cortical bone: the influence of mean strain and strain range. Acta Orthop Scand.1981;52:481-490.[21] Carter DR, Hayes WC. The compressive behavior of bone as a two-phase porous structure. J Bone Joint Surg Am. 1977; 59:954-962.[22] Martin RB, Sharkey NA. Mechanical effects of postmortem changes, preservation, and allograft bone treatments. In: Bone Mechanics Handbook, Cowin, S. C. (Ed.). CRC Press, Florida. 2001:(20-1)-(20-24).[23] An YH, Bensen CV. General considerations of mechanical testing, In: Mechanical Testing of Bone and the Bone-Implant Interface, Yuehuei H. An,Robert A. Draughn. CRC Press. Florida.2000:119-131.[24] Lievers WB, Poljsak AS, Waldman SD, et al. Effects of dehydration-induced structural and material changes on the apparent modulus of cancellous bone. Med Eng Phys. 2010; 32(8):921-925.[25] Morgan EF, Keaveny TM. Dependence of yield strain of human trabecular bone on anatomic site. J Biomech. 2001; 34:569-577.[26] Bayraktar HH, Morgan EF, Niebur GL,et al. Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue. Journal Biomech. 2004;37:27-35.[27] Pan B, Qian K, Xie HM,et al. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas Sci Technol. 2009;20:062001.[28] Kalouche I, Crépin J, Abdelmoumen S, et al. Mechanical properties of glenoid cancellous bone. Clin Biomech (Bristol, Avon). 2010;25(4):292-298.[29] Morgan EF, Yeh OC, Chang WC, et al. Nonlinear behavior of trabecular bone at small strains. J Biomech Eng. 2001;123 (1):1-9.[30] Bevill G, Easley SK, Keaveny TM. Side-artifact errors in yield strength and elastic modulus for human trabecular bone and their dependence on bone volume fraction and anatomic site. J Biomech. 2007;40(15): 3381-3388.[31] Odgaard A, Linde F. The underestimation of Young's modulus in compressive testing of cancellous bone specimen. J Biomech.1991;24(8):691-698.[32] Turner CH,Cowin SC.Errors induced by off-axis measurement of the elastic properties of bone. J Biomech. 1988;110:213-215.[33] Wu SQ. Zhongbei Daxue Xuebao: Ziran Kexueban. 2012; 33(2):216-220. 吴淑琴. 股骨皮质骨生物力学特性研究[J].中北大学学报:自然科学版,2012,33(2):216-220.[34] Ruan WD, Xue Y. Zhongguo Zuzhi Gongcheng Yanjiu yu Linchang Kangfu. 2010; 14(43):8113-8116. 阮文东,雪原.股骨头的力学测定:实验与方法[J].中国组织工程研究与临床康复, 2010, 14(43):8113-8116.[35] Cristofolini L, Schileo E, Juszczyk M, et al. Mechanical testing of bones: the positive synergy of finite-element models and in vitro experiments. Philos Transact A Math Phys Eng Sci. 2010; 368(1920):2725-2763. |