中国组织工程研究

中国组织工程研究 ›› 2012, Vol. 16 ›› Issue (16): 2947-2950.doi: 10.3969/j.issn.1673-8225.2012.16.023

• 组织工程口腔材料 tissue-engineered oral materials • 上一篇    下一篇

常用3种光固化复合树脂材料修复楔状缺损离体牙的组织学评价

王雪梅1，吴巍伟2，高美珍2，赵  忠2，余占海1   

  1. 兰州大学，1口腔医学院，2物理科学与技术学院，甘肃省兰州市 730000
  • 收稿日期:2011-10-25 修回日期:2011-12-07 出版日期:2012-04-15 发布日期:2012-04-15
  • 通讯作者: 余占海，博士，教授，兰州大学口腔医学院，甘肃省兰州市 730000 yuzhanhai@ lzu.edu.cn 并列通讯作者：赵忠，博士，副教授，兰州大学物理科学与技术学院，甘肃省兰州市 730000 zhaozh@ lzu.edu.cn
  • 作者简介:王雪梅，女，1968年生，江苏省扬州市人，汉族，1992年西安医科大学口腔系毕业，讲师，主要从事牙体牙髓学、材料学、牙周病学、黏膜病方面的研究。 wangxuemei@ lzu.edu.cn。

Histological evaluation of three commonly used light-cured resin composite materials in the wedge-shaped defect repair of extracted teeth  

Wang Xue-mei1, Wu Wei-wei2, Gao Mei-zhen2, Zhao Zhong2, Yu Zhan-hai1   

  1. 1School of Stomatology, 2School of Physical Science and Technology, Lanzhou University, Lanzhou  730000, Gansu Province, China
  • Received:2011-10-25 Revised:2011-12-07 Online:2012-04-15 Published:2012-04-15
  • Contact: Corresponding author: Yu Zhan-hai, Doctor, Professor, School of Stomatology, Lanzhou University, Lanzhou 730000, Gansu Province, China yuzhanhai@ lzu.edu.cn Corresponding author: Zhao Zhong, Doctor, Associate professor, School of Physical Science and Technology, Lanzhou University, Lanzhou 730000, Gansu Province, China zhaozh@lzu.edu.cn
  • About author:Wang Xue-mei, Lecturer, School of Stomatology, Lanzhou University, Lanzhou 730000, Gansu Province, China wangxuemei@ lzu.edu.cn

PDF

1095

被引次数

17

摘要：

背景：延长口腔生物材料的使用寿命，是当今口腔治疗学与材料学的关注点。
目的：评价3种光固化复合树脂修复牙体楔状缺损的效果。
方法：在体外模型中对离体牙进行统一造模，扫描电子显微镜观察3MZ350树脂、3M流体树脂及P90树脂3种修复材料充填后材料与牙体的结合界面。
结果与结论：3种材料都显示了与牙体组织基本良好的结合性能，3MZ350树脂微裂隙多出现在粘接剂层，可有空泡出现；P90组树脂材料侧有断裂纹；流体树脂微裂隙很小，这与其流动性有关系。说明3种材料都可以直接充填，良好的边缘封闭性能的粘接剂可有效减少复合树脂-牙齿界面的微渗漏，增加树脂修复的成功率。
关键词：复合树脂；楔状缺损；光固化；结合界面；扫描电子显微镜
doi:10.3969/j.issn.1673-8225.2012.16.023

关键词: 复合树脂, 楔状缺损, 光固化, 结合界面, 扫描电子显微镜

Abstract:

BACKGROUND: Extending the service life of dental biomaterials is the concern of today's dental therapeutics and materials science.
OBJECTIVE: To evaluate the repairing effects of three kinds of light-cured resin composite materials on wedge-shaped defects.
METHODS: A unified modeling was performed on the in vitro models of isolated teeth. Scanning electron microscope was used to observe the bonding interface of the materials and dental body after filling by the three repairing materials (3MZ350 resin, 3M fluid resin and P90 resin).
RESULTS AND CONCLUSION: All three materials showed a reasonably good tooth-bonding property. In the 3MZ350 group, microfissures were usually found in the adhesive layer, and cavity might be found as well; in the P90 group, failure cracks were found on the resin side. The failure cracks of the fluid resin were small; this might be related to the fluidity. These findings indicate that all the three materials can be directly used for filling; adhesive with good edge sealing performance can effectively reduce the micro leakage of the composite resin-teeth interface and increase the restoration success.

中图分类号: