Clinical application of temporary crown and cement materials: physical properties and biological safety

doi:10.3969/j.issn.2095-4344.2015.21.021

Abstract

Abstract:

BACKGROUND: Temporary crown has been used widely in clinic. The physical properties and biological safety of temporary crown and cement materials are more superior along with the development of material science.
OBJECTIVE: To summarize clinical application, physical properties and biological safety of the temporary crown and cement materials.
METHODS: PubMed database was searched by the key words of “temporary crown, provisional crown, temporary restoration, provisional restoration, interim restoration” in English to retrieve relevant articles published from January 2004 to December 2014. Literatures addressing the temporary crown and cement materials were included, and the repetitive researches were excluded.
RESULTS AND CONCLUSION: Through the clinical evaluation and experimental study, the physical properties (polymerization shrinkage, polymerization heat production, polymerization monomer release) and biological safety (cytotoxicity, irritation to the soft tissue) of the temporary crown and cement materials are the key problems needed to overcome. With the appearance of new materials and new fabrication methods, the temporary crown and adhesive materials have great application prospect and higher clinical value, but in the exploration process of the laboratory research and clinical application, there are many problems to be solved.

中国组织工程研究杂志出版内容重点：生物材料；骨生物材料; 口腔生物材料; 纳米材料; 缓释材料; 材料相容性；组织工程

Key words: Dental Prosthesis, Dentin-Bonding Agents, Review

CLC Number:

R318

Nie Er-min, Jiang Rui, Zhang Chun-yuan, Zeng Jin-di, Tan Ji-zhou. Clinical application of temporary crown and cement materials: physical properties and biological safety[J]. Chinese Journal of Tissue Engineering Research, 2015, 19(21): 3392-3397.

Figures/Tables 1

References

[1] Carle D,Shope B,Ogrodnick D.Temporary crowns.J Vet Dent. 2013;30(1):34-38.
[2] Roe P,Patel RD.Fabrication of a modified repositioning key for relining provisional restorations.J Prosthet Dent.2010;104(6): 401-402.
[3] Balkenhol M,Ferger P,Mautner MC,et al.Provisional crown and fixed partial denture materials:Mechanical properties and degree of conversion.Dent Mater,2007;23(12):1574-1583.
[4] Burke FJ,Murray MC,Shortall AC.Trends in indirectdentistry: 6. Provisional restorations, more than just atemporary. Dent Update.2005;32(8):443-444,447-448, 450-452.
[5] Strassler HE.Fixed prosthodontics provisional materials: making the right selection. Compend Contin Educ Dent. 2013; 34(1):22-24,26.
[6] Tüzüner T,Ku?göz A,Nur BG.Temporary management of permanent centralincisors loss caused by trauma in primarydentition with natural crowns: a case report.Dent Traumatol.2009;25(5):522-526.
[7] Hammond BD,Cooper JR 3rd,Lazarchik DA.Predictable repair of provisional restorations.J EsthetRestor Dent.2009; 21(1):19-24.
[8] Balkenhol M,Mautner MC,Ferger P,et al.Mechanical properties of provisional crown and bridgematerials: chemical-curing versus dual-curing systems.J Dent.2008; 36(1):15-20.
[9] Balkenhol M,Knapp M,Ferger P,et al.Correlation between polymerization shrinkage andmarginal fit of temporary crowns. Dental Mater.2008;24(11):1575-1584.
[10] Kim SH,Watts DC.Polymerization shrinkage-strain kineticsof temporary crown and bridge materials. Dent Mater.2004;20(1): 88-95.
[11] Kim SH,Watts DC.Effect of glass-fiber reinforcement andwater storage on fracture toughness of polymer- basedprovisional crown and FPD materials.Int J Prosthodont. 2004;17(3):318-322.
[12] Kim SH,Watts DC.In vitro study of edge-strength of provisional polymer-basedcrown and fixed partial denture materials.Dent Mater.2007;23(12):1570-1573.
[13] Vally Z,Sykes LM,Aspeling ME,et al.In vitro comparison of the compressive strengths of seven different provisional crown materials.SADJ.2013;68(2):64-67.
[14] Poonacha V,Poonacha S,Salagundi B,et al.In vitro comparison of flexural strength and elastic modulus of three provisional crown materials used in fixed prosthodontics. J Clin Exp Dent.2013;5(5):e212-217.
[15] Al Twal EQ,Chadwick RG.Fibre reinforcement of two temporary composite bridge materials--effect upon flexural properties.J Dent.2012;40(12):1044-1051.
[16] Garoushi SK,Vallittu PK,Lassila LV. Short glass fiber-reinforced composite with a semi-interpenetrating polymer network matrix for temporary crowns and bridges. J Contemp Dent Pract.2008;9(1):14-21.
[17] Nejatidanesh F,Lotfi HR,Savabi O.Marginal accuracy ofinterim restorations fabricated from four interimautopolymerizing resins. J Prosthet Dent. 2006;95(5):364-367.
[18] Hansen PA,Sigler E,Husemann RH.Making multiple predictable single-unit provisional restorations using an indirect technique.J Prosthet Dent. 2009;102(4):260-263.
[19] Hamza TA,Rosenstiel SF,Elhosary MM,et al.Theeffect of fiber reinforcement on the fracture toughness andflexural strength of provisional restorative resins. J Prosthet Dent.2004; 91(3): 258-264.
[20] Ha SR,Yang JH,Lee JB,et al.Comparison of polymer-based temporary crown and fixed partial denture materials by diametral tensile strength.J Adv Prosthodont. 2010;2(1): 14-17.
[21] Akova T,Ozkomur A,Uysal H.Effect of food-simulatingliquids on the mechanical properties of provisionalrestorative materials. Dent Mater.2006;22(12):1130-1134.
[22] Hamza TA,Rosenstiel SF,El-Hosary MM,et al.Fracture resistance of fiber-reinforced PMMA interim fixedpartial dentures. J Prosthodont. 2006;15(4):223-228.
[23] Balkenhol M,Köhler H,Orbach K,et al.Fracture toughness of cross-linked and non-cross-linkedtemporary crown and fixed partial denture materials.Dent Mater. 2009;25(7):917-928.
[24] Debnath S,Ranade R,Wunder SL,et al.Interface effects on mechanical properties ofparticle-reinforced composites.Dent Mater.2004;20(7):677-686.
[25] Gujjari AK,Bhatnagar VM,Basavaraju RM.Color stability and flexural strength of poly (methyl methacrylate) and bis-acrylic composite based provisional crown and bridge auto-polymerizing resins exposed to beverages and food dye: an in vitro study. Indian J Dent Res.2013;24(2):172-177.
[26] Givens EJ Jr,Neiva G,Yaman P,et al.Marginal Adaptation and Color Stability of Four ProvisionalMaterials.J Prosthodont. 2008;17(2):97-101.
[27] Watts DC.Reaction kinetics and mechanics inphoto-polymerised networks.Dent Mater,2005;21(1):27-35.
[28] Stansbury JW,Trujillo-Lemon M,Lu H,et al. Conversion-dependent shrinkage stress and strain in dentalresins and composites.Dent Mater.2005;21(1):56-67.
[29] Dewaele M,TruffierBoutry D,Devaux J,et al. Volumecontraction in photocured dental resins: theshrinkage-conversion relationship revisited.Dent Mater. 2006;22(4):359-365.
[30] Ellakwa A,Cho N,Lee IB.The effect of resin matrixcomposition on the polymerization shrinkage andrheological properties of experimental dental composites.Dent Mater.2007;23(10): 1229-1235.
[31] Atai M,Watts DC.A new kinetic model for thephotopolymerization shrinkage-strain of dental compositesand resin-monomers.Dent Mater.2006;22(8):785-791.
[32] Baroudi K,Saleh AM,Silikas N,et al.Shrinkagebehaviour of flowable resin-composites related toconversion and filler-fraction. J Dent. 2007;35(8):651-655.
[33] Ehrenberg D,Weiner GI,Weiner S.Long-term effects ofstorage and thermal cycling on the marginal adaptation ofprovisional resin crowns: a pilot study. J Prosthet Dent.2006;95(3): 230-236.
[34] Yu YQ,Zou DR,Su JS.The study of the monomer release from four kinds of temporary crown material by infrared spectrum. Shanghai Kou Qiang Yi Xue.2008;17(6):643-647.
[35] Ramkumar V,Sangeetha A,Kumar V.Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study. J Pharm Bioallied Sci.2012; 4(Suppl2):S376-383.
[36] Cardoso M,Torres MF,Rego MR,et al.Influence of application site of provisional cement on the marginal adaptation of provisional crowns.J Appl Oral Sci.2008;16(3):214-218.
[37] Akova T,Ozkomur A,Dundar C,et al.Intrapulpal heat generation during provisionalization: effect of desensitizer and matrix type. J Prosthodont. 2008;17(2):108-113.
[38] Altintas SH,Yondem I,Tak O,et al.Temperaturerise during polymerization of three different provisionalmaterials.Clin Oral Investig.2008;12(3):283-286.
[39] Michalakis K,Pissiotis A,Hirayama H,et al.Comparison of temperature increase in the pulp chamberduring the polymerization of materials used for the directfabrication of provisional restorations.J Prosthet Dent.2006;96(6):418-423.
[40] Chiodera G,Gastaldi G,Millar BJ.Temperature change inpulp cavity in vitro during the polymerization of provisionalresins. Dental Mater.2009;25(3):321-325.
[41] Usumez A,Ozturk AN,Aykent F.The effect of dentindesensitizers on thermal changes in the pulp chamberduring fabrication of provisional restorations.J Oral Rehabil. 2004;31(6):579-584.
[42] Kim SH,Watts DC.Exotherm behavior of the polymer-basedprovisional crown and fixed partial denture materials.Dental Mater.2004;20(4):383-387.
[43] Bevilacqua L,Biasotto M,Cadenaro M,et al. Reaction exothermia of 2 relining resins for temporarycrowns. Minerva Stomatol.2005;54(1-2):35-41.
[44] Seelbach P,Finger WJ,Ferger P,et al.Temperature rise on dentin caused by temporary crown andfixed partial denture materials: Influencing factors.J Dent. 2010;38(12):964-973.
[45] Hattori N,Suzuki T,Jinno S,et al.Methyl methacrylate activates the Gsta1 Promoter.J Dent Res.2008;87(12):1117-1121.
[46] Perry RD,Magnuson B.Provisional materials: key components of interim fixed restorations. Compend Contin Educ Dent. 2012; 33(1):59-60,62.
[47] Polydorou O,Hammad M,König A,et al．Release of monomers from different core build-up materials、Dent Meter. 2009;25(9): 1090-1095．
[48] Lung CY,Darvell BW.Minimizationofthe inevitable residualmonomer in denturebaseacrylic.Dent Meter. 2005; 21(9):1119-1128.
[49] Bettencourt AF,Neves CB,de Almeida MS,et al. Biodegradation of acrylicbasedresins: Areview. Dent Meter,2010;26(5):171-180.
[50] Danesh G, LippoldC, MischkeKL, et al. Polymerization characteristics of light- and auto-curing resins for individual splints.Dent Mater.2006;22(4):426-433.

[51] VanLanduyt KL,Nawrot T,Geebelen B,et al. How muchdo resin- based dental materials release? A meta-analytical approach.Dent Meter.2011;27(7):723-747.
[52] Bural C,Aktas E,Deniz G,et al.Effect of post-polymerization heat-treatmentson degreeofconversion,leaching residual MMA and in vitro cytotoxicity of autopolymerizing acrylic repair resin. Dent Meter.2010;27(4):1135-1143.
[53] Ulker M,Ulker HE,Zortuk M,et alEffects of current provisionalrestorationmaterialsontheviabilityoffibroblasts. EurJ Dent.2009;3(2):114-119.
[54] Kleinsasser NH,Schmid K,Sassen AW,et al. Cytotoxic and genotoxic effects of resin monomers in human salivary gland tissue and lymphocytes as assessed by the single cell microgel electrophoresis (Comet) assay. Biomaterials. 2006; 27(9):1762-1770.
[55] Samuelsen JT,Dahl JE,Karlsson S. Apoptosis induced by themonomersHEMA and TEGDMA involves formation of ROS and differential activation of the MAP-kinases p38, JNK and ERK. Dent Meter.2007;23(1):34-39.
[56] Haselton DR,Diaz-Arnold AM,Dawson DV.Effect of storage solution on surface roughness of provisional crown and fixed partial denture materials.J Prosthodont. 2004;13(4):227-232.
[57] Balkenhol M,Meyer M,Michel K,et al. Effect of surface condition and storage time on therepairability of temporary crown and fixed partial denturematerials.J Dent. 2008;36(11):861-872.
[58] Ayuso-Montero R,Martinez-Gomis J,Lujan-Climent M,et al.Influence of matrix type on surface roughness of three resins for provisional crowns and fixed partial dentures.J Prosthodont.2009;18(2):141-144.
[59] Orug BO,Baysallar M,Centiner D,et al.Increased antibacterial activity of zinc polycarboxylate cement by the addition of chlorhexidinegluconate in fixed prosthodontics.Int J Prosthodont.2005;18(5):377-382.
[60] Lewinstein I,Chweidan H,Matalon S,et al.Retention and marginal leakage of provisional crowns cemented with provisional cements enriched with chlorhexidinediacetate.J Prosthet Dent.2007;98(5):373-378.
[61] Chiramana S,Siddineni KC,Jyothula RR,et al.Evaluation of the Luting Cement Spacefor Provisional Restoration by using Various Coats of Die Spacer Materials-An Invitro Study.J Clin Diagn Res.2014;8(9):ZC22-25.
[62] Rego MR,Santiago LC.Retention of provisional crowns cemented with eight temporary cements: comparative study.J Appl Oral Sci.2004;12(3):209-212.
[63] Kanakuri Kl,Kawamoto Y,Kakehashi Y,et al.Influence of temporary cements on bond strength between resin-based luting agents and dentin.Am J Dent.2006;19(2):101-105.
[64] Dersley G, Masri R.A technique to recement provisional crowns by reactivating residualzinc oxide-eugenol cement.J Prosthet Dent.2006;95(5):397-398.
[65] Mosharraf R.A simple method for cleaning zinc oxide-eugenol provisionalcement residues from the intaglio surface of casting restorations.J Prosthet Dent. 2004;91(2):200.
[66] Kanakuri K,Kawamoto Y,Matsumura H.Influence of temporary cement remnant and surface cleaning method on bond strength to dentin of a composite luting system. J Oral Sci. 2005; 47(1):9-13.