中国组织工程研究

中国组织工程研究 ›› 2011, Vol. 15 ›› Issue (40): 7475-7479.doi: 10.3969/j.issn.1673-8225.2011.40.015

• 脐带脐血干细胞 umbilical cord blood stem cells • 上一篇    下一篇

循环灌注接种方法在人脐带间充质干细胞骨组织工程中的应用

李  敏1，2，李巍巍2，杨  兵3，李小刚1，齐念民2   

  1. 1兰州大学生命学院，甘肃省兰州市730000
    2上海交通大学药学院生物医药细胞工程实验室，上海市200240
    3江苏省干细胞工程技术研究中心，江苏省泰州市  225300
  • 收稿日期:2011-01-05 修回日期:2011-03-18 出版日期:2011-10-01 发布日期:2011-10-01
  • 通讯作者: 李巍巍，在读博士，主要从事间充质干细胞组织工程的研究。 liweiwei1984@sjtu.edu.cn
  • 作者简介:李敏★，女，1981年生，河南省安阳市人，汉族，兰州大学在读硕士，上海交通大学在读客座研究生，主要从事间充质干细胞组织工程的研究。 lm198110@sina.cn
  • 基金资助:

    国家科技重大专项(重大新药创制专项)资助(2009ZX09306-008)。

Application of cycling perfusion seeding method in bone tissue engineering of human umbilical cord derived mesenchymal stem cells

Li Min1,2, Li Wei-wei2, Yang Bing3, Li Xiao-gang1, Qi Nian-min2   

  1. 1School of Life Science, Lanzhou University, Lanzhou  730000, Gansu Province, China
    2Cell Engineering Laboratory of Biomedicine, School of Pharmacy, Shanghai Jiao Tong University, Shanghai  200240, China
    3Jiangsu Public Stem Cell Engineering Technology Research Center, Taizhou  225300, Jiangsu Province, China
  • Received:2011-01-05 Revised:2011-03-18 Online:2011-10-01 Published:2011-10-01
  • Contact: Li Wei-wei, Studying for doctorate, Cell Engineering Laboratory of Biomedicine, School of Pharmacy, Shanghai Jiao Tong University, Shanghai 200240, China liweiwei1984@sjtu.edu.cn
  • About author:Li Min★, Studying for master’s degree, School of Life Science, Lanzhou University, Lanzhou 730000, Gansu Province, China; Cell Engineering Laboratory of Biomedicine, School of Pharmacy, Shanghai Jiao Tong University, Shanghai 200240, China lm198110@sina.cn
  • Supported by:

    the National Science & Technology Major Project of China (Key Innovative Drug Development), No.2009ZX09306-
    008*

PDF

404

被引次数

5

摘要：

背景：课题前期设计了一套模块式三维灌注生物反应器系统，并初步将其应用于大鼠骨髓间充质干细胞接种于三维非纺型聚对苯二甲酸乙二醇酯(polyethylene terephthalate，PET)纤维片状载体的骨组织工程研究中。
目的：应用自制的循环灌注接种系统将传代人脐带间充质干细胞接种至三维无纺布PET片状载体，并与传统的静态接种方法接种的载体进行比较。
方法：培养传代人脐带间充质干细胞，流式细胞仪检测细胞表面标记，将细胞用循环灌注方法(高速率组和低速率组)和静态接种方法接种至三维聚PET无纺布片状载体。
结果与结论：传代细胞形态稳定、活力好，高标达 CD90，CD105，不表达CD14，CD45。循环灌注方法组的接种效率，细胞密度，增殖能力均优于静态接种组。循环灌注高速率组乳酸脱氢酶偏高，并且细胞的延迟期长于静态接种。循环灌注组的碱性磷酸酶活性高于静态接种组。结果表明，循环灌注接种方法更适合间充质干细胞骨组织工程的应用，进一步应用仍需对工程参数进行优化。

关键词: 循环灌注, 脐带, 间充质干细胞, 接种方法, 骨组织工程

Abstract:

BACKGROUND: A set of modular three-dimensional perfusion bioreactor system was pre-designed in the previous studies, which has be initially applied for implantation of rat bone marrow mesenchymal stem cells into a three-dimensional non-woven polyethylene terephthalate (PET) fiber sheet carrier in bone tissue engineering.
OBJECTIVE: To investigate the use of self-made cycling perfusion seeding method for human umbilical cord derived mesenchymal stem cells (hUCMSCs) seeded on PET sheet carrier.
METHODS: Primary hUCMSCs were cultured and passaged. The fifth passage of cells were characterized by determining their surface antigen using a flow cytometry and then seeded onto three-dimentional PET disc scaffolds by static seeding method and cycling perfusion seeding method (low perfusion rate and high perfusion rate).
RESULTS AND CONCLUSION: The hUCMSCs of the fifth passage were steady in the cell shapes, with good viability and highly expressed CD90, CD105, while were negative for CD14, CD45. The cycling perfusion seeding method was superior to the static seeding method in the seeding efficiency, cell density and proliferative ability. Dehydrogenase activity and delayed period of cells seeded by using the cycling perfusion seeding method with high perfusion rate were better than those by using the static seeding method. Alkaline phosphatase activity was also higher in the cycling perfusion seeding method group than the static seeding method. The data suggested that the cycling perfusion seeding method is more suitable for hUCMSCs bone tissue engineering and further optimization of this method is needed.

中图分类号: