[1] CAI XY, SANG D, YUCHI CX, et al. Using finite element analysis to determine effects of the motion loading method on facet joint forces after cervical disc degeneration. Comput Biol Med. 2020;116:103519.
[2] WELCH-PHILLIPS A, GIBBONS D, AHERN DP, et al. What is finite element analysis? Clin Spine Surg. 2020;33(8):323-324.
[3] BREKELMANS WA, POORT HW, SLOOFF TJ. A new method to analyse the mechanical behaviour of skeletal parts. Acta Orthop Scand. 1972; 43(5):301-317.
[4] BELYTSCHKO T, KULAK RF, SCHULTZ AB, et al. Finite element stress analysis of an intervertebral disc. J Biomech. 1974;7(3):277-285.
[5] ZHANG Q, CHON T, ZHANG Y, et al. Finite element analysis of the lumbar spine in adolescent idiopathic scoliosis subjected to different loads. Comput Biol Med. 2021;136:104745.
[6] DUPUIS S, FORTIN C, CAOUETTE C, et al. Global postural re-education in pediatric idiopathic scoliosis: a biomechanical modeling and analysis of curve reduction during active and assisted self-correction. BMC Musculoskelet Disord. 2018;19(1):200.
[7] NOURRY V. 1/6 Anatomie et physiologie du rachis [Anatomy and physiology of the spine]. Soins Gerontol. 2012;(95):45-46.
[8] QIU GX. Scoliosis in China: history and present status. Chin Med J (Engl). 2017;130(21):2521-2523.
[9] KANO H, MATSUO Y, KUBO N, et al. Spinal injuries in suicidal jumpers. Spine (Phila Pa 1976). 2019;44(1):E13-E18.
[10] YANG S, SHAO Y, YAN Q, et al. Differential diagnosis strategy between lower extremity arterial occlusive disease and lumbar disc herniation. Biomed Res Int. 2021;2021:6653579.
[11] BAILEY S, STADELMANN MA, ZYSSET PK, et al. Influence of metastatic bone lesion type and tumor origin on human vertebral bone architecture, matrix quality, and mechanical properties. J Bone Miner Res. 2022;37(5):896-907.
[12] HE Z, ZHANG M, LI W, et al. Finite element analysis of an improved correction system for spinal deformity. In Vivo. 2021;35(4):2197-2205.
[13] GOULD SL, CRISTOFOLINI L, DAVICO G, et al. Computational modelling of the scoliotic spine: a literature review. Int J Numer Method Biomed Eng. 2021;37(10):e3503.
[14] NEGRINI S, DONZELLI S, AULISA AG, et al. 2016 SOSORT guidelines: orthopaedic and rehabilitation treatment of idiopathic scoliosis during growth. Scoliosis Spinal Disord. 2018;13:3.
[15] GUAN T, ZHANG Y, ANWAR A, et al. Determination of three-dimensional corrective force in adolescent idiopathic scoliosis and biomechanical finite element analysis. Front Bioeng Biotechnol. 2020;8:963.
[16] SCHLAGER B, NIEMEYER F, GALBUSERA F, et al. Asymmetrical intrapleural pressure distribution: a cause for scoliosis? A computational analysis. Eur J Appl Physiol. 2018;118(7):1315-1329.
[17] VAN DER PLAATS A, VELDHUIZEN AG, VERKERKE GJ. Numerical simulation of asymmetrically altered growth as initiation mechanism of scoliosis. Ann Biomed Eng. 2007;35(7):1206-1215.
[18] KAMAL Z, ROUHI G. Stress distribution changes in growth plates of a trunk with adolescent idiopathic scoliosis following unilateral muscle paralysis: a hybrid musculoskeletal and finite element model. J Biomech. 2020;111:109997.
[19] PASHA S. 3D Deformation patterns of s shaped elastic rods as a pathogenesis model for spinal deformity in adolescent idiopathic scoliosis. Sci Rep. 2019;9(1):16485.
[20] KAELIN AJ. Adolescent idiopathic scoliosis: indications for bracing and conservative treatments. Ann Transl Med. 2020;8(2):28.
[21] WEI W, ZHANG T, HUANG Z, et al. Finite element analysis in brace treatment on adolescent idiopathic scoliosis. Med Biol Eng Comput. 2022;60(4):907-920.
[22] GUY A, LABELLE H, BARCHI S, AUDET-DUCHESNE E, et al. Braces designed using CAD/CAM combined or not with finite element modeling lead to effective treatment and quality of life after 2 years: a randomized controlled trial. Spine (Phila Pa 1976). 2021;46(1):9-16.
[23] GIGNAC D, AUBIN CE, DANSEREAU J, et al. Optimization method for 3D bracing correction of scoliosis using a finite element model. Eur Spine J. 2000;9(3):185-190.
[24] VERGARI C, COURTOIS I, EBERMEYER E, et al. Experimental validation of a patient-specific model of orthotic action in adolescent idiopathic scoliosis. Eur Spine J. 2016;25(10):3049-3055.
[25] COURVOISIER A, NESME M, GERBELOT J, et al. Prediction of brace effect in scoliotic patients: blinded evaluation of a novel brace simulator-an observational cross-sectional study. Eur Spine J. 2019;28(6):1277-1285.
[26] BUELL TJ, BESS S, XU M, et al. Optimal tether configurations and preload tensioning to prevent proximal junctional kyphosis: a finite element analysis. J Neurosurg Spine. 2019:1-11.
[27] PEI B, LU D, WU X, et al. Effects of growing rod technique with different surgical modes and growth phases on the treatment outcome of early onset scoliosis: a 3-D finite element analysis. Int J Environ Res Public Health. 2022;19(4):2057.
[28] DI SILVESTRE M, ZANIRATO A, GREGGI T, et al. Severe adolescent idiopathic scoliosis: posterior staged correction using a temporary magnetically-controlled growing rod. Eur Spine J. 2020;29(8):2046-2053.
[29] BOUYER B, VASSAL M, ZAIRI F, et al. Surgery in vertebral fracture: epidemiology and functional and radiological results in a prospective series of 518 patients at 1 year’s follow-up. Orthop Traumatol Surg Res. 2015;101(1):11-15.
[30] ALLAIRE BT, LU D, JOHANNESDOTTIR F, et al. Prediction of incident vertebral fracture using CT-based finite element analysis. Osteoporos Int. 2019;30(2):323-331.
[31] ANITHA DP, BAUM T, KIRSCHKE JS, et al. Effect of the intervertebral disc on vertebral bone strength prediction: a finite-element study. Spine J. 2020;20(4):665-671.
[32] QIU TX, TAN KW, LEE VS, et al. Investigation of thoracolumbar T12-L1 burst fracture mechanism using finite element method. Med Eng Phys. 2006;28(7):656-664.
[33] ZENG ZL, ZHU R, LI SZ, et al. Formative mechanism of intracanal fracture fragments in thoracolumbar burst fractures: a finite element study. Chin Med J (Engl). 2013;126(15):2852-2858.
[34] BASARAN R, EFENDIOGLU M, KAKSI M, et al. Finite element analysis of short- versus long-segment posterior fixation for thoracolumbar burst fracture. World Neurosurg. 2019;128:e1109-e1117.
[35] LIU H, WANG H, LIU J, et al. Biomechanical comparison of posterior intermediate screw fixation techniques with hybrid monoaxial and polyaxial pedicle screws in the treatment of thoracolumbar burst fracture: a finite element study. J Orthop Surg Res. 2019;14(1):122.
[36] LIU JM, ZHANG Y, ZHOU Y, et al. The effect of screw tunnels on the biomechanical stability of vertebral body after pedicle screws removal: a finite element analysis. Int Orthop. 2017;41(6):1183-1187.
[37] WANG D, LI Y, YIN H, et al. Three-dimensional finite element analysis of optimal distribution model of vertebroplasty. Ann Palliat Med. 2020; 9(3):1062-1072.
[38] MEYER C, VAN GAALEN K, LESCHINGER T, et al. Kyphoplasty of osteoporotic fractured vertebrae: a finite element analysis about two types of cement. Biomed Res Int. 2019;2019:9232813.
[39] KIM HS, WU PH, JANG IT. Lumbar degenerative disease part 1: anatomy and pathophysiology of intervertebral discogenic pain and radiofrequency ablation of basivertebral and sinuvertebral nerve treatment for chronic discogenic back pain: a prospective case series and review of literature. Int J Mol Sci. 2020;21(4):1483.
[40] YANG B, O’CONNELL GD. Intervertebral disc swelling maintains strain homeostasis throughout the annulus fibrosus: a finite element analysis of healthy and degenerated discs. Acta Biomater. 2019;100:61-74.
[41] RUIZ WILLS C, FOATA B, GONZÁLEZ BALLESTER MÁ, et al. Theoretical explorations generate new hypotheses about the role of the cartilage endplate in early intervertebral disk degeneration. Front Physiol. 2018; 9:1210.
[42] LU T, LU Y. Comparison of biomechanical performance among posterolateral fusion and transforaminal, extreme, and oblique lumbar interbody fusion: a finite element analysis. World Neurosurg. 2019;129: e890-e899.
[43] WANG B, HUA W, KE W, et al. Biomechanical evaluation of transforaminal lumbar interbody fusion and oblique lumbar interbody fusion on the adjacent segment: a finite element analysis. World Neurosurg. 2019;126:e819-e824.
[44] LI XF, LV ZD, YIN HL, et al. Impact of adjacent pre-existing disc degeneration status on its biomechanics after single-level anterior cervical interbody fusion. Comput Methods Programs Biomed. 2021; 209:106355.
[45] 刘涛,王振江,陈凡,等.腰椎椎弓根动态内固定修复腰椎退行性疾病: K-Rod弹性棒、通用弹性棒及Dynesys系统比较[J].中国组织工程研究,2014,18(44):7111-7116.
[46] WANG P, ABDIN E, SHAFIE S, et al. Estimation of prevalence of osteoporosis using OSTA and its correlation with sociodemographic factors, disability and comorbidities. Int J Environ Res Public Health. 2019;16(13):2338.
[47] IMAI K, OHNISHI I, MATSUMOTO T, et al. Assessment of vertebral fracture risk and therapeutic effects of alendronate in postmenopausal women using a quantitative computed tomography-based nonlinear finite element method. Osteoporos Int. 2009;20(5):801-810.
[48] IMAI K. Computed tomography-based finite element analysis to assess fracture risk and osteoporosis treatment. World J Exp Med. 2015;5(3): 182-187.
[49] FEI Q, LI QJ, YANG Y, et al. Three-dimensional finite element model of thoracolumbar spine with osteoporotic vertebral compression fracture. Zhonghua Yi Xue Za Zhi. 2010;90(41):2943-2946.
[50] ZHANG W, ZHAO J, LI L, et al. Modelling tri-cortical pedicle screw fixation in thoracic vertebrae under osteoporotic condition: a finite element analysis based on computed tomography. Comput Methods Programs Biomed. 2020;187:105035.
[51] GUO HZ, GUO DQ, TANG YC, et al. Selective cement augmentation of cranial and caudal pedicle screws provides comparable stability to augmentation on all segments in the osteoporotic spine: a finite element analysis. Ann Transl Med. 2020;8(21):1384.
[52] GOTO K, TAJIMA N, CHOSA E, et al. Effects of lumbar spinal fusion on the other lumbar intervertebral levels (three-dimensional finite element analysis). J Orthop Sci. 2003;8(4):577-584.
[53] GOEL VK, MONROE BT, GILBERTSON LG, et al. Interlaminar shear stresses and laminae separation in a disc. Finite element analysis of the L3-L4 motion segment subjected to axial compressive loads. Spine (Phila Pa 1976). 1995;20(6):689-698.
|