3D-printed methacrylated gelatin scaffold loaded with fibroblasts promoting angiogenesis in vitro

doi:10.12307/2024.536

Abstract

Abstract: BACKGROUND: Combining seed cells with 3D bioprinting technology enables the specific construction of various tissues and organs to meet the demands of tissue repair. However, further research is needed on the promotion of angiogenesis in damaged tissues.
OBJECTIVE: By cultivating a 3D scaffold structure of methacrylated gelatin loaded with fibroblasts, obtaining the supernatant, and mixing it in different proportions with a complete culture medium to simulate the cellular microenvironment during tissue repair, this study aimed to explore the role of various cellular microenvironments in promoting angiogenesis in endothelial cells.
METHODS: A methacrylated gelatin scaffold structure loaded with fibroblasts was prepared using an extrusion-based 3D bioprinting process. Hydrogel scaffold extract was prepared and mixed with a complete culture medium in ratios of 1:1, 1:2, and 1:4 to obtain conditioned medium. Mouse embryonic fibroblasts BALB3T3 and human umbilical vein endothelial cells were co-cultured with complete medium (control group) and hydrogel scaffold extract, respectively. Cell proliferation was assessed using the CCK-8 assay and cell viability was analyzed using live/dead staining. Three kinds of conditioned medium and complete medium (control group) were used to co-culture with human umbilical vein endothelial cells for tube formulation assay, vascular genetic testing, and immunofluorescence staining of CD31.
RESULTS AND CONCLUSION: (1) Scanning electron microscopy revealed that the methacrylated gelatin scaffold exhibited a porous structure, and rheological results demonstrated excellent mechanical properties of the hydrogel. CCK-8 assay and live/dead cell staining showed that the hydrogel scaffold extract had no obvious cytotoxicity. (2) Tube formulation assay indicated that the hydrogel showed the total length of cell tubules in 1:1 conditioned medium group was smaller than that in the control group (P < 0.05). There were no statistical differences among the four groups in the number of vascular branches formed by endothelial cells (P > 0.05). (3) qRT-PCR results showed that for vascular endothelial growth factor mRNA expression, the 1:2 conditioned medium group was lower than the 1:1 conditioned medium group on day 1 (P < 0.01). On day 3, the expression level of vascular endothelial growth factor in the 1:2 conditioned medium group was higher than that in the control group (P < 0.01). On day 5, the cytokine expression level in the 1:2 conditioned medium group was significantly higher than that in the other three groups (P < 0.01 or P < 0.000 1). The expression in the 1:1 conditioned medium group was significantly lower than that in the other three groups (P < 0.05 or P < 0.01). On day 1, the expression level of basic fibroblast growth factor in the 1:1 conditioned medium group was significantly higher than that in the control group and 1:4 conditioned medium group (P < 0.01, P < 0.05). The expression was higher in the 1:2 conditioned medium group than that in the control group (P < 0.05). On day 3, the expression levels of cytokines in the 1:4 conditioned medium group was higher than that in the control group (P < 0.05). (4) On day 3, the expression of CD31 in the 1:2 conditioned medium group was higher than that in the control group and the 1:4 conditioned medium group (P < 0.05). (5) The results indicate that the resulting conditioned media can simulate the microenvironment of vascular regeneration after tissue damage, promoting the vascularization process of endothelial cells. The best promotion of vascularization in endothelial cells was observed when the ratio of supernatant to complete culture medium was 1:2.

Key words: 3D printing, methacrylated gelatin, hydrogel, fibroblast, human umbilical vein endothelial cell, promoting angiogenesis

CLC Number:

Sun Hui, , Wang Lijun, Cui Aixin, Li Pingping, , Liu Zhiyi. 3D-printed methacrylated gelatin scaffold loaded with fibroblasts promoting angiogenesis in vitro[J]. Chinese Journal of Tissue Engineering Research, 2024, 28(22): 3484-3489.

References

[1] EMING SA, MURRAY PJ, PEARCE EJ. Metabolic orchestration of the wound healing response. Cell Metab. 2021;33(9):1726-1743.
[2] TEOH JH, MOZHI A, SUNIL V, et al. 3D Printing Personalized, Photocrosslinkable Hydrogel Wound Dressings for the Treatment of Thermal Burns. Adv Funct Mater. 2021;31(48):2105932.
[3] R IBAÑEZ RI, DO AMARAL RJFC, REIS RL, et al. 3D-Printed Gelatin Methacrylate Scaffolds with Controlled Architecture and Stiffness Modulate the Fibroblast Phenotype towards Dermal Regeneration. Polymers (Basel). 2021;13(15):2510.
[4] MARTIN P, NUNAN R. Cellular and molecular mechanisms of repair in acute and chronic wound healing. Br J Dermatol. 2015;173(2):370-378.
[5] LING Z, ZHAO J, SONG S, et al. Chitin nanocrystal-assisted 3D bioprinting of gelatin methacrylate scaffolds Regen Biomater. 2023;10:rbad058.
[6] XUE M, JACKSON CJ. Extracellular Matrix Reorganization During Wound Healing and Its Impact on Abnormal Scarring. Adv Wound Care. 2015;4(3):119-136.
[7] LIU X, WANG X, ZHANG L, et al. 3D Liver Tissue Model with Branched Vascular Networks by Multimaterial Bioprinting. Adv Healthc Mater. 2021;10(23):e2101405.
[8] GUTIERREZ AM, FRAZAR EM, X KLAUS MV, et al. Hydrogels and Hydrogel Nanocomposites: Enhancing Healthcare through Human and Environmental Treatment. Adv Healthc Mater. 2022;11(7):e2101820.
[9] CHOI SW, GUAN W, CHUNG K. Basic principles of hydrogel-based tissue transformation technologies and their applications. Cell. 2021;184(16):4115-4136.
[10] GUIMARÃES CF, AHMED R, MARQUES AP, et al. Engineering Hydrogel-Based Biomedical Photonics: Design, Fabrication, and Applications. Adv Mater. 2021; 33(23): e2006582.
[11] LIU C, WANG Z, WEI X, et al. 3D printed hydrogel/PCL core/shell fiber scaffolds with NIR-triggered drug release for cancer therapy and wound healing. Acta Biomater. 2021;131:314-325.
[12] ARUNPRASERT K, PORNPITCHANARONG C, ROJANARATA T, et al. Bioinspired ketoprofen-incorporated polyvinylpyrrolidone/polyallylamine/ polydopamine hydrophilic pressure-sensitive adhesives patches with improved adhesive performance for transdermal drug delivery. Eur J Pharm Biopharm. 2022;181: 207-217.
[13] JIANG G, LI S, YU K, et al. A 3D-printed PRP-GelMA hydrogel promotes osteochondral regeneration through M2 macrophage polarization in a rabbit model. Acta Biomater. 2021;128:150-162.
[14] CHAN WW, YEO DCL, TAN V, et al. Additive Biomanufacturing with Collagen Inks. Bioengineering. 2020;7(3):66.
[15] ZHU M, WANG Y, FERRACCI G, et al. Gelatin methacryloyl and its hydrogels with an exceptional degree of controllability and batch-to-batch consistency. Sci Rep. 2019;9(1):6863.
[16] YUE K, TRUJILLO-DE SANTIAGO G, ALVAREZ MM, et al. Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels. Biomaterials. 2015;73:254-271.
[17] LIU G, CHEN J, WANG X, et al. Functionalized 3D-Printed ST2/Gelatin Methacryloyl/Polcaprolactone Scaffolds for Enhancing Bone Regeneration with Vascularization. Int J Mol Sci. 2022;23(15):8347.
[18] PAN H, DENG L, HUANG L, et al. 3D-printed Sr2ZnSi2O7 scaffold facilitates vascularized bone regeneration through macrophage immunomodulation. Front Bioeng Biotechnol. 2022;10:1007535.
[19] MADDALUNO L, URWYLER C, WERNER S. Fibroblast growth factors: key players in regeneration and tissue repair. Development. 2017;144(22):4047-4060.
[20] CHOI E, KIM D, KANG D, et al. 3D-printed gelatin methacrylate (GelMA)/silanated silica scaffold assisted by two-stage cooling system for hard tissue regeneration. Regen Biomater. 2021;8(2):rbab001.
[21] KARAGEORGIOU V, KAPLAN D. Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials. 2005;26(27):5474-5491.
[22] KIGEL B, RABINOWICZ N, VARSHAVSKY A, et al. Plexin-A4 promotes tumor progression and tumor angiogenesis by enhancement of VEGF and bFGF signaling. Blood. 2011;118(15):4285-4296.
[23] LOSI P, BRIGANTI E, ERRICO C, et al. Fibrin-based scaffold incorporating VEGF- and bFGF-loaded nanoparticles stimulates wound healing in diabetic mice. Acta Biomater. 2013;9(8):7814-7821.
[24] GU Z, ZHANG X, LI L, et al. Acceleration of segmental bone regeneration in a rabbit model by strontium-doped calcium polyphosphate scaffold through stimulating VEGF and bFGF secretion from osteoblasts. Mater Sci Eng C Mater Biol Appl. 2013;33(1):274-281.
[25] ELBIALY ZI, ASSAR DH, ABDELNABY A, et al. Healing potential of Spirulina platensis for skin wounds by modulating bFGF, VEGF, TGF-ß1 and α-SMA genes expression targeting angiogenesis and scar tissue formation in the rat model. Biomed Pharmacother. 2021;137:111349.
[26] CROSS MJ, CLAESSON-WELSH L. FGF and VEGF function in angiogenesis: signalling pathways, biological responses and therapeutic inhibition. Trends Pharmacol Sci. 2001;22(4):201-207.