中国组织工程研究

中国组织工程研究 ›› 2011, Vol. 15 ›› Issue (13): 2385-2389.doi: 10.3969/j.issn.1673-8225.2011.13.025

• 数字化骨科 digital orthopedics • 上一篇    下一篇

基于流体动力学模拟腹腔温热化疗仪系统的设计

付艳玲，盛鑫军，杨秋蒙，朱向阳   

  1. 上海交通大学，上海市  200240
  • 收稿日期:2010-11-19 修回日期:2011-01-26 出版日期:2011-03-26 发布日期:2013-10-23
  • 作者简介:付艳玲★，女，1986年生，辽宁省海城市人，汉族，2011年上海交通大学毕业，硕士，主要从事机械方面的研究。 yanlingfu@gmail.com
  • 基金资助:

    上海交通大学医(理)工交叉基金资助(YG2009MS15)“术中腹腔内温热化疗治疗仪的研制”。

System design for an intraoperative peritoneal hyperthermia chemotherapy machine based on computational fluid dynamics simulation

Fu Yan-ling, Sheng Xin-jun, Yang Qiu-meng, Zhu Xiang-yang   

  1. Shanghai Jiao Tong University, Shanghai  200240, China
  • Received:2010-11-19 Revised:2011-01-26 Online:2011-03-26 Published:2013-10-23
  • About author:Fu Yan-ling★, Master, Shanghai Jiao Tong University, Shanghai 200240, China yanlingfu@gmail.com
  • Supported by:

    Shanghai Jiao Tong University Medicine (Science) Engineering Cross-Fund, No. YG2009MS15*

PDF

681

被引次数

2

摘要：

背景：腹腔温热化疗仪应用区域大剂量化疗和温热的协同作用，诱导腹腔内肿瘤癌细胞发生凋亡和坏死，其临床疗效已得到各国学者肯定。然而，当前国内腹腔温热化疗仪温度控制精度低，治疗效果不理想，无法满足治疗需求。
目的：基于F2812及流体动力学仿真模拟，讨论了一种腹腔温热化疗仪的系统设计，以期优化参数，达到最佳温度控制精度，利用流体动力学仿真为最佳手术实施布管策略提供数值模拟数据。
方法：基于F2812芯片的DSP控制器可快速响应控制加热及循环系统，提高系统温度控制精度。通过PID参数整定得到最佳控制参数；通过流体动力学仿真实验，模拟术中腹腔温度场及速度矢量场，优化腹腔布管策略。流体动力学仿真采用FLUENT软件，讨论了3种常见术中腹腔布管方式，并给出术中腹腔温度场分布。
结果与结论：设计了可提高系统温度精度的温度采集控制模块，系统温度控制精度±0.3 ℃。通过FLUENT仿真结果发现闭腔三进两出方式即可满足治疗要求，并给出三维腹腔温度场分布情况。

关键词: 温热灌注化疗, 温度控制, 数字化外科技术, 流体动力学

Abstract:

BACKGROUND: Introperative peritoneal hyperthermia chemotherapy (IPHC) using interaction of regional high-dose chemotherapy and hyperthermia induce apoptosis and necrosis of intraoperative tumor cells. Its clinical effect has been confirmed around the world. However, current IPHC machine has low control accuracy and its therapeutic efficacy is not ideal.
OBJECTIVE: To design a kind of IPHC machine system based on F2812 and computational fluid dynamics (CFD) simulation and optimize its parameters to have best temperature control and therapeutic effects.
METHODS: Control system of heating and circulation based on DSP F2812 had fast response and high temperature control accuracy. Optimize parameter could be obtained by tuning PID algorithm. CFD simulation of Intraperitoneal temperature field and velocity vector field were calculated by FLUENT. Three kind of introperative peritoneal piping mode were compared to find the best strategy. Peritoneal temperature distribution was given.
RESULTS AND CONCLUSION: The temperature acquisition and control module was designed, and the temperature control accuracy was ±0.3 ℃. Optimization results showed that 3 inflows and 2 outflows with closed cavity can meet operation requirements. Peritoneal temperature distribution in 3D is also given.

中图分类号: