中国组织工程研究

中国组织工程研究 ›› 2011, Vol. 15 ›› Issue (42): 7859-7862.doi: 10.3969/j.issn.1673-8225.2011.42.017

• 组织工程口腔材料 tissue-engineered oral materials • 上一篇    下一篇

LF托槽与传统四翼托槽最大静摩擦力特性的比较

印明晶1，侯  录2，张令波2，徐实谦3   

  1. 1哈尔滨医科大学附属第三医院经纬医院口腔科，黑龙江省哈尔滨市 150001
    2哈尔滨医科大学附属第二医院口腔科，黑龙江省哈尔滨市 150001
    3哈尔滨工业大学材料学院，黑龙江省哈尔滨市  150001
  • 收稿日期:2011-03-02 修回日期:2011-04-10 出版日期:2011-10-15 发布日期:2011-10-15
  • 通讯作者: 侯录，主任医师，哈尔滨医科大学附属第二医院口腔正畸科，黑龙江省哈尔滨市 150001
  • 作者简介:印明晶★，女，1983年生，黑龙江省宾县人，2009年哈尔滨医科大学毕业，硕士，主要从事口腔正畸学方面研究。 ymj8377@163.com
  • 基金资助:

    黑龙江省科技攻关项目医疗卫生技术领域基金资助项目，课题名称为“仿真模拟正畸矫治过程中托槽与弓丝间摩擦力的实验研究”。

A comparative study of the static friction force between LF bracket and conventional bracket

Yin Ming-jing1, Hou Lu2, Zhang Ling-bo2, Xu Shi-qian3   

  1. 1Department of Stomatology, Jingwei Hospital, Third Affiliated Hospital of Harbin Medical University, Harbin  150001, Heilongjiang Province, China
    2Department of Stomatology, Second Affiliated Hospital of Harbin Medical University, Harbin  150001, Heilongjiang Province, China
    3Material School, Harbin Institute of Technology, Harbin  150001, Heilongjiang Province, China
  • Received:2011-03-02 Revised:2011-04-10 Online:2011-10-15 Published:2011-10-15
  • Contact: Hou Lu, Chief physician, Department of Stomatology, Jingwei Hospital, Third Affiliated Hospital of Harbin Medical University, Harbin 150001, Heilongjiang Province, China
  • About author:Yin Ming-jing★, Master, Department of Stomatology, Jingwei Hospital, Third Affiliated Hospital of Harbin Medical University, Harbin 150001, Heilongjiang Province, China ymj8377@163.com
  • Supported by:

    the Science and Technology Tackle Key Program of Heilongjiang Province in Health Care Technology*

PDF

291

被引次数

9

摘要：

背景：LF托槽是一种新型六翼托槽，相较传统四翼托槽具有多种结扎方式的特点，提示其摩擦力特性可能具备多样性。
目的：观察干湿两种条件下LF托槽相对于传统四翼托槽所表现的摩擦力特点。
方法：利用扫描电镜观察不锈钢方丝的表面形貌，根据其特征确定方丝拉拔方向，再据此设定在摩擦力试验阶段不锈钢方丝的运行方向。在干湿两种条件下，按照析因设计方案分别测试结扎主翼、结扎全部翼两种结扎方式下的LF托槽、传统四翼托槽与不锈钢方丝以及圆丝组合时的摩擦力大小。
结果与结论：与传统四翼托槽相比，LF托槽结扎主翼时最大静摩擦力显著减小，结扎全部六翼时最大静摩擦力显著增加。传统四翼托槽与LF托槽湿润条件下的最大静摩擦力均高于干燥条件下的最大静摩擦力(P  < 0.05)。不锈钢方丝的最大静摩擦力显著大于不锈钢圆丝(P < 0.05)。表明LF托槽具有灵活的摩擦力特性，采用不同结扎方式可提供不同大小的摩擦力。这提示主翼结扎方式下的LF托槽可以用于滑动法关闭间隙阶段，六翼结扎方式下的LF托槽可用于牙齿位置的精确调整。

关键词: 四翼托槽, LF托槽, 人工唾液, 异向性, 最大静摩擦力

Abstract:

BACKGROUND: Compared with traditional brackets, LF brackets have potential of various friction characteristics because of their different ligating methods. But report about it is insufficient.
OBJECTIVE: To study the frictional characteristics of LF bracket when it is sliding along an archwire compared with regular four wings bracket in dry and wet state.
METHODS: The surface states of the stainless steel rectangular archwires were observed with scanning electronic microscope in order to determine the drawing direction when they were manufactured. In dry and artificial saliva environment, the friction was measured by XF-Ⅰtesting machine according to the drawing direction. All factors and levels were completely combined according to factorial designs, including environment, bracket, archwire.
RESULTS AND CONCLUSION: Compared with the regular four wings brackets, the friction of the LF brackets was lower when the main wings were ligated, but higher when all the six wings were ligated. The friction in wet state was higher than that in dry state (P < 0.05). The friction of stainless steel rectangular archwires was higher than that of stainless steel round archwires (P < 0.05). The results above indicate that different ligating methods of LF brackets may provide different frictions. The method of ligating the main wings of LF bracket can be applied in the process of space closure; and the method of ligating all the wings of LF bracket can be applied in moving teeth to a certain position precisely.

中图分类号: