Accuracy of three-dimensional reconstruction models using Arigin 3D Pro and Mimics software programs

doi:10.3969/j.issn.2095-4344.0729

Abstract

Abstract:

BACKGROUND: With the improvement of medical imaging technology, the visualization of human anatomy has been further developed; the role of three-dimensional (3D) reconstruction in medical treatment is also becoming increasingly prominent. Mimics is the most widely used medical image reconstruction software. Arigin 3D Pro is a recently developed 3D reconstructed medical software system based on 3D printing.

OBJECTIVE: To study the accuracy of 3D reconstruction models obtained by using Arigin 3D Pro and Mimics with medical images.

METHODS: The image data of liver, spine, knee joint and heart were selected, and the deviations of two software reconstruction models were analyzed based on the 3D model reconstructed by Mimics. Totally 10 cases of skull and 1 case of femoral comminuted fracture image data were selected and reconstructed. Each reconstruction model was measured with 10 groups of feature sizes to evaluate the differences between the two software programs.

RESULTS AND CONCLUSION: Arigin 3D Pro and Mimics were used to reconstruct the liver, spine, knee and heart data. The mean ± standard deviation of model deviations were (0.93 ± 1.05), (0.36 ± 0.74), (0.45 ± 0.74), (0.18 ± 0.41) mm. It took 3 minutes and 35 minutes for Arigin 3D Pro and Mimics to reconstruct the liver model respectively, and both software reconstructed other models for less than 1 minute. There was no statistically significant difference between the feature sizes of the two software for the 3D reconstruction models of skull and femoral comminuted fracture data (P > 0.05). The 3D reconstruction model of Arigin 3D Pro is comparable to that of Mimics. For the liver model, the reconstructed time of Arigin 3D Pro is significantly shorter than that of Mimics.

中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程

Key words: Imaging, Three-Dimensional, Computer Simulation, Tissue Engineering

CLC Number:

R318

Cao Gui-ping, Zhang Ming-jiao, Liu Fei, Lian Qin, Xu Xian-hui. Accuracy of three-dimensional reconstruction models using Arigin 3D Pro and Mimics software programs[J]. Chinese Journal of Tissue Engineering Research, 2018, 22(15): 2384-2389.

Figures/Tables 2

References

[1] 周勇,邹春华,张朝跃.三维可视化系统对髋关节骨性结构的评价[J].中国组织工程研究,2014,18(4): 601-606.

[2] 李靖,杨龙,王建吉,等.基于DICOM数据三维重建及其对骨科植入物的指导应用[J].中国组织工程研究, 2017,21(7): 1046-1051.

[3] 黄若昆,谢鸣,余嘉,等. 虚拟现实技术应用于髋部骨折手术仿真的建立[J].中国组织工程研究,2013,17 (13): 2383-2389.

[4] 王娇,刘洋,张晓玲,等. Mimics软件在医学图像三维重建中的应用[J]. 医疗卫生装备,2015,36(2): 115-118.

[5] 张海峰,史冠忠,朱洪智,等. 基于图像数据建立器官三维模型[J]. 中国组织工程研究,2015,19(40): 6547-6552.

[6] Ma L,Zhou Y,Zhang Y,et al. Biomechanical effects of masticatory muscles on human mandible after reconstructed mandibulectomy tumor. J Craniofac Surg. 2015 Jan 30. [Epub ahead of print]

[7] 尹庆水,万磊. Simpleware软件功能及其在数字骨科的应用数字骨科入门(三)[J]. 中国骨科临床与基础研究杂志,2010,2(1):72-74.

[8] Flores RL,Liss H,Raffaelli S,et al. The technique for 3D printing patient-specific models for auricular reconstruction. J Craniomaxillofac Surg.2017; 45(6): 937-943.

[9] 薛艳青,杨春兰,高宏建,等. 利用Amira进行帕金森病靶点核团的分割及三维重建[J]. 医疗卫生装备,2012,33(8):1-3.

[10] Dong D, Tian J, Dai Y, et al. Unified reconstruction framework for multi-modal medical imaging. J Xray Sci Technol. 2011;19(1):111-126.

[11] Tian J, Zhao M, Xue J, et al. 3DMed: An integrated 3D medical image processing and analyzing system. 2004: 585-594.

[12] 钟小虎. PC机CT三维成像在模拟规划肝脏手术中的应用[D]: 南昌大学, 2012.

[13] 邱冰,张明娇,唐本森,等.个性化手术导板在全膝关节置换术中的应用[J]. 中华骨科杂志,2016,36(3): 143-150.

[14] 唐通鸣,邓佳文,张政,等. 基于逆向工程和快速成型技术的髋骨三维实体模型个性化重建[J].中国组织工程研究, 2015,19(26): 4253-4257.

[15] 陈中,邢跃刚,罗绍华.利用数字几何技术重建个性化骨骼模型[J]. 中国组织工程研究,2016,20(39): 5846-5851.

[16] 滕勇,王臻,李迪尘,等. 快速成型的个体化人工半膝关节的研制——股骨髁的三维建模[J]. 中国修复重建外科杂志, 2004,18(4):257-360.

[17] 滕勇,王臻,刘非,等. 生物工程活性骨的三维建模[J]. 第四军医大学学报, 2001,22(22):2026-2029.

[18] 裴国献,张元智. 数字骨科学:一门骨科学新分支的萌生[J]. 中华创伤骨科杂志, 2007,9(7):601-604.

[19] 张维杰,连芩,李涤尘,等.基于3-D打印技术的软骨修复及软骨下骨重建[J]. 中国修复重建外科杂志, 2014, 28(3): 318-324.

[20] 付军,王臻,郭征,等. 数字化结合3D打印个体化导板的设计加工及其在骨肿瘤手术中的应用[J]. 中华创伤骨科杂志, 2015, 17 (1): 50-54.

[21] 章莹,李宝丰,王新宇,等. 术前3D打印技术模拟复杂骨盆骨折手术提高疗效的可行性研究[J]. 中华创伤骨科杂志,2015,17(1):29-33.

[22] Chen Z, Chen D, Tang L, et al. Relationship between the position of the mental foramen and the anterior loop of the inferior alveolar nerve as determined by cone beam computed tomography combined with mimics. J Comput Assist Tomogr. 2015;39(1):86-93.

[23] Qian L,Li P,Wu W,et al. Restoration of the spinal canal volume in stenosis dependent on pedicle-lengthening distance in pedicle-lengthening osteotomy: A three dimensional simulation. Bone Joint J. 2016;98-B(2):238-243.

[24] Luo H, Meyer-Szary J, Wang Z, et al. Three-dimensional printing in cardiology: Current applications and future challenges. Cardiol J. 2017;24(4):436-444.

[25] Oh TS, Jeong WS, Chang TJ, et al. Customized orbital wall reconstruction using three-dimensionally printed rapid prototype model in patients with orbital wall fracture. J Craniofac Surg. 2016;27(8): 2020-2024.

[26] Kang HW, Lee SJ, Ko IK, et al. A 3D bioprinting system to produce human-scale tissue constructs with structural integrity. Nat Biotechnol. 2016;34(3):312-319.

[27] Arabnejad S, Burnett JR, Pura JA, et al. High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraint]. Acta Biomaterialia 2016;30(8):345.

[28] Wang X, Xu S, Zhou S, et al. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review. Biomaterials.2016;83:127-141.

[29] 兰红波,李涤尘,卢秉恒. 微纳尺度3D打印[J].中国科学:技术科学, 2015, 45(9):919-940..

[30] 史玉升,张李超,白宇,等. 3D打印技术的发展及其软件实现[J].中国科学:信息科学,2015,45(2): 197-203.

[31] Giannopoulos AA, Steigner ML, George E, et al. Cardiothoracic applications of 3-dimensional printing. J Thorac Imaging. 2016;31(5): 253-272.

[32] Parthasarathy J. 3D modeling, custom implants and its future perspectives in craniofacial surgery. Ann Maxillofac Surg. 2014;4(1): 9-18.

[33] Sirimanna P, Gladman MA. Development of a proficiency-based virtual reality simulation training curriculum for laparoscopic appendicectomy. ANZ J Surg. 2017;87(10):760-766.

[34] Hashimoto DA, Petrusa E, Phitayakorn R, et al. A proficiency-based virtual reality endoscopy curriculum improves performance on the fundamentals of endoscopic surgery examination. Surg Endosc. 2017 Aug 15. doi: 10.1007/s00464-017-5821-5.

[35] McGrath JL,Taekman JM,Dev P, et al. Using virtual reality simulation environments to assess competence for emergency medicine learners. Acad Emerg Med. 2017 Sep 9. doi: 10.1111/acem.13308.

[36] 孔祥溢,王任直. 虚拟现实技术在神经外科手术规划及教学培训中的应用[J]. 中国医学物理学杂志, 2017,34(6): 641-643.

[37] 石巧,侯建霞.虚拟现实技术在口腔诊疗操作培训中的应用[J]. 国际口腔医学杂志, 2015,42(1):69-74.

[38] Qiu B, Liu F, Tang B, et al. Clinical study of 3D imaging and 3D printing technique for patient-specific instrumentation in total knee arthroplasty. J Knee Surg. 2017;30(8):822-828..

[39] 邱冰,唐本森,邓必勇,等.基于三维反求技术和计算机辅助技术的3D打印导板在全膝关节置换术中的初步应用[J].中华创伤骨科杂志, 2016,18(1): 35-41.