Abstract:

BACKGROUND: Condylar fracture can occur under direct and indirect forces, and however, its risk and correlation with the impact site are rarely reported.
OBJECTIVE: To quickly establish normal mandible three-dimensional finite element model and to analyze the strain conditions of the condyle under force at different parts of the mandible.
METHODS: An adolescent volunteer was examined by multilayer spiral CT scans, whose mandible was normal and oral cavity was healthy. We used the reverse engineering software Mimics and large finite element software MSC.Patran to establish the three-dimensional finite element model of the mandible and to verify the feasibility of the model in the impact test at the body of the mandible, chin, mandibular angle and condyle.
RESULTS AND CONCLUSION: A rapid establishment of mandible dimensional finite element biomechanical model could reproduce the morphology of the mandible, which was able to obtain the overall visual impression of the mandibular condyle. Geometric model included 80 044 nodes and 18 441 units. The mandibular chin, one side of the body, mandibular angle and condyle were given 100 N force respectively. The maximum equivalent stress of the bone cortex appeared in condylar region. So the mandibular condylar fractures were at the greatest risk. Experimental results contribute to mechanically analyze the condylar fracture type and to judge the severity of fractures.

中国组织工程研究杂志出版内容重点：组织构建；骨细胞；软骨细胞；细胞培养；成纤维细胞；血管内皮细胞；骨质疏松；组织工程

Key words: Mandible, Finite Element Analysis;, Biomechanics