Two kinds of intermaxillary traction influence the mandibular micro-implant and its surrounding: Three-dimensional finite element analysis

doi:10.3969/j.issn.2095-4344.2013.24.011

Abstract

Key words: tissue construction, oral tissue construction, three-dimensional finite element, micro-implant, intermaxillary traction, mandibular, dentition, temporomandibular joint, stress analysis, simulation, orthodontics, biomechanics

Zhao Gang, Wei Jia-jia, Zhang Xiao-ping, Yuan Xu, Shen Jian-xuan, Zhang Wei. Two kinds of intermaxillary traction influence the mandibular micro-implant and its surrounding: Three-dimensional finite element analysis[J]. Chinese Journal of Tissue Engineering Research, 2013, 17(24): 4444-4450.

Figures/Tables 3

References

1. Kang CR, Pan X, Li L, et al. Zhongguo Zuzhi Gongcheng Yanjiu. 2012;16（4）：660-664.康成荣，潘宣，李梁，等.纤维桩核冠修复上合中切牙三维有限元模型的建立[J].中国组织工程研究, 2012,16（4）：660-664.http://d.wanfangdata.com.cn/Periodical_xdkf201204021.aspx

2. Yue SC, Du YH, Tang XJ, et al. Zhongguo Zuzhi Gongcheng Yanjiu. 2012;16（21）：3881-3885.岳世超，杜跃华，唐晓君，等.微螺钉种植体支抗与口外支抗对正畸前后上颌或双颌前突变化的Meta分析[J].中国组织工程研究,2012, 16（21）：3881-3885.http://www.cqvip.com/QK/80481C/201221/41994917.html

3. Liu X, Liu L, Liu Y, et al. Kouqiang Yixue. 2010;9（30）：520-522.刘鑫，刘岚，刘瑶，等.微小种植体支抗的三维有限元分析[J]. 口腔医学,2010, 9（30）：520-522.http://www.cqvip.com/QK/92834X/201009/35353684.html

4. Liu Y, Liu JH. Kouqiang Yixue. 2010;11（30）：664-666.柳杨，刘建华.微种植体支抗联合Sliding jig推磨牙向后的临床研究[J]. 口腔医学,2010, 11（30）：664-666.http://www.cqvip.com/QK/92834X/201011/36225997.html

5 Motoyoshi M, Yano S, Tsuruoka T, et al. Biomechanical effect of abutment on stability of orthodontic mini-implant. A finite element analysis. Clin Oral Implants Res. 2005;16(4):480-485.http://www.ncbi.nlm.nih.gov/pubmed?term=Clin%20Oral%20Implants%20Res.%202005%3B16(4)%3A480-485.http://onlinelibrary.wiley.com/doi/10.1111/j.1600-0501.2005.01130.x/abstract;jsessionid=7AF77F4B28D8958B8E5DB82BBA019F55.d02t03

6. Xie WJ, Zhong XL, Qin Y. Linchuang Kouqiang Yixue Zazhi. 2012；28（5）:288-291.谢卫江，钟小龙，秦媛.微种植支抗移位的影响因素探讨[J].临床口腔医学杂志,2012；28（5）:288-291.http://d.wanfangdata.com.cn/Periodical_lckqyx201205013.aspx

7. Song XQ, Hang JN. Zhongguo Kouqiang Zhongzhixue Zazhi. 2011;16（3）:188-191.宋晓青，黄吉娜.利用微种植体支抗系统矫治成人前牙开合的进展[J].中国口腔种植学杂志,2011,16（3）:188-191.http://www.cqvip.com/QK/91408X/201103/39501841.html

8.Ng KW,Mauck RL,Statman LY,et al.Dynamic deformational loading results in selective application of mechanical stimulation in a layered,tissue-engineered cartilage construct. Biorheology. 2006;43(3-4):497-507.http://www.ncbi.nlm.nih.gov/pubmed/?term=Dynamic+deformational+loading+results+in+selective+application+of+mechanical+stimulation+in+a+layered%2Ctissue-engineered+cartilage+construct.

9. Xiang YN, Hu M, Guo KF, et al. Zhongguo Shiyong Kouqiangke Zazhi. 2008;1（3）：151-153.相亚宁, 胡敏, 郭克峰, 等. 包括TMJ和上下颌骨及牙列的MBT直丝弓矫治器三维有限元模型的建立[J]. 中国实用口腔科杂志,2008, 1（3）：151-153.http://www.cnki.com.cn/Article/CJFDTotal-ZSKQ200803009.htm

10. Huang YW. Zhongguo Zuzhi Gongcheng Yanjiu. 2012;16(13):2423-2426.黄宇文.有限元分析在口腔生物力学中的应用[J].中国组织工程研究，2012,16(13):2423-2426. http://www.cnki.com.cn/Article/CJFDTotal-XDKF201213039.htm

11.Nagasao T,Kobayashi M,Tsuchiya Y,et al.Finite element analysis of the stresses around fixtures in various reconstructed mandibular models-partⅡ(effect of horizontal load).J Caniomaxillofac Surg. 2003;31(3):168-175. http://www.ncbi.nlm.nih.gov/pubmed/?term=Finite+element+analysis+of+the+stresses+around+fixtures+in+various+reconstructed+mandibular+models-part%E2%85%A1(effect+of+horizontal+load).

12. Lin XM, Pei JG, Niu G, et al. Changchun Gongye Daxue Xuebao:Ziran Kexueban. 2005;26(3):225-228.林晓梅,裴建国,牛刚,等.医学图像三维重建方法的研究和实现[J].长春工业大学学报: 自然科学版,2005,26(3):225-228.

http://www.cqvip.com/QK/96672A/200503/20326045.html

13.Bougherara H,Zdero R,Shah S,et al.A biomechanical assessment of modular and monoblock revision hip implants using FE analysis and strain gage measurement. J Orthopaed Surg Res. 2010; 5(34):1-12.http://www.ncbi.nlm.nih.gov/pubmed/?term=A+biomechanical+assessment+of+modular+and+monoblock+revision+hip+implants+using+FE+analysis+and+strain+gage+measurement.

14.Zhao X,Chosa E,Totoribe K,et al.Effect of periacetabular osteotomy for acetabular dysplasia clarified by three-dimensional finite element analysis. J Orthop Sci.2010;15:632-640.http://www.ncbi.nlm.nih.gov/pubmed/?term=Effect+of+periacetabular+osteotomy+for+acetabular+dysplasia+clarified+by+three-dimensional+finite+element+analysis.

15. Tang T,Liao Y,Zhou WS,et al. Shiyong Shouwaike Zazhi. 2003;17(2): 104.唐韬,廖勇,周维山,等.改良克氏针内固定治疗bennett骨折[J].实用手外科杂志, 2003, 17(2): 104.http://www.cqvip.com/qk/84063X/200302/7909187.html

16.Hudieb M,Kasugai S.Biomechanical effect of crestal bone osteoplasty before implant placement: a three-dimensional finite element analysis. Int J Oral Maxillofac Surg.2011;40(2):200-206.http://www.ncbi.nlm.nih.gov/pubmed/?term=Biomechanical+effect+of+crestal+bone+osteoplasty+before+implant+placement%3A+a+three-dimensional+finite+element+analysis.

17. Zhang Q, Chen X, Zhu J, et al. Zhongguo Zuzhi Gongcheng Yanjiu. 2012;16(12):2207-2211.张勤，陈曦，祝军, 等. Damon-Ⅲ自锁托槽矫治安氏Ⅱ类2分类错颌畸形患者下颌位置及面部比例的变化[J]. 中国组织工程研究，2012,16(12):2207-2211.http://www.cnki.com.cn/Article/CJFDTotal-XDKF201212035.htm

18. Yu XH, Chen JL, Xun CL, et al. Linchuang Yanjiu. 2012;50(7):42-44.喻小辉，陈金春，寻春雷,等.微种植体支抗和J钩矫治成人安氏Ⅱ类1分错颌上齿槽前部垂直向过度发育效果对比分析[J]. 临床研究，2012,50(7):42-44.http://www.cnki.com.cn/Article/CJFDTotal-ZDYS201207023.htm

19. He J, Zhao LS, Gao JH, et al. Hebei Yiyao. 2009;31（22):3116-3117.何军，赵连生，高金辉, 等. 微种植体支抗42例种植成败原因分析[J].河北医药，2009,31（22):3116-3117.http://www.cqvip.com/QK/94524X/200922/32554447.html

20. Song JL, Zhao ZH, Hu LH, et al. Huaxi Kouqiang Yixue Zazhi. 2001;19（1）：43-45.宋锦璘，赵志河，胡林华, 等. Herbst矫治器在不同重建时对口颌肌肉和韧带约束力的影响[J].华西口腔医学杂志，2001,19（1）：43-45.http://www.cnki.com.cn/Article/CJFDTotal-HXKQ200101014.htm

21. Pi X. Beijing: People’s Medical Publishing House. 2007.皮昕.口腔解剖生理学[M].北京:人民卫生出版社，2007.http://www.shangxueba.com/book/751223.html

22.Koolstra JH, van Eijden TM. Application and validation of athree-dimensional mathematical model of the human masticatorysystem in vivo. J Biomech. 1992;25（2）：75-187.http://www.ncbi.nlm.nih.gov/pubmed/1733993

23. Qiu WL. Yixue Shengwu Lixue. 2007;22（2）：115-118.邱蔚六.生物力学原理无所不在浅论生物力学与口腔医学的关系[J].医学生物力学，2007,22（2）：115-118.http://www.cnki.com.cn/Article/CJFDTotal-YISX200702002.htm

24. Jiang ZL. Zhongguo Shengwu Yixue Gongcheng Xuebao. 2011;30（2）：161-168.姜宗来.我国生物力学研究现状与展望[J].中国生物医学工程学报，2011,30（2）：161-168.http://www.cqvip.com/QK/90680X/201102/37865302.html

25. Duan YZ, Yang ZH, Leng J, et al. Xiandai Kouqiang Yixue Zazhi. 2003;17（3）：251-1252.段银钟，杨振华，冷军,等.上颌前方牵引联合Ⅲ类颌间牵引矫正严重骨性Ⅲ类错颌[J].现代口腔医学杂志，2003,17（3）：251-1252.http://www.cnki.com.cn/Article/CJFDTotal-XDKY200303030.htm

26. Zhao G, Shao X, Li DC, et al. Zhongguo Zuzhi Gongcheng Yanjiu yu Linchuang Kangfu. 2011;15（41）：7673-7676.赵刚，邵鑫，李德超,等.微支抗种植体及不同矫治力作用下髁突软骨中核心结合因子α1的表达[J].中国组织工程研究与临床康复，2011,15（41）：7673-7676.http://d.wanfangdata.com.cn/Periodical_xdkf201141018.aspx

27. Zheng LL, Liu J, Chen J, et al. Zhongguo Zuzhi Gongcheng Yanjiu. 2012;16（17）：3073-3077.郑琳琳，刘珺，陈杰,等.不同软组织处理方式对支抗微种植钉-骨界面的组织学影响[J].中国组织工程研究，2012,16（17）：3073-3077.http://mall.cnki.net/magazine/Article/XDKF201217016.htm

28. Li JH, Lin XP. Guoji Kouqiang Yixue Zazhi. 2012;39（2）：277-280.李建华，林新平.正畸支抗用微种植钉对牙根和牙周组织造成的损伤及损伤后的组织学变化[J]. 国际口腔医学杂志，2012,39（2）：277-280.http://www.cnki.com.cn/Article/CJFDTotal-GWKQ201202039.htm

29. Zhao H, liu HC, Gu XM, et al. Jouqiang Hemian Xiufuxue Zazhi. 2009;10（3）：173-176.赵弘，刘洪臣，顾晓明，等. 微型种植钉增强正畸支抗的临床稳定性研究及相关危险因素分析[J]. 口腔颌面修复学杂志，2009，10（3）：173-176.http://www.cnki.com.cn/Article/CJFDTotal-KHXF200903023.htm

30. Shu Y. Qingdao Dxue Shuoshi Lunwen. 2011.舒艳. 不同加载时机及受力条件下微种植钉稳定性的研究[D]. 青岛大学硕士论文，2011.http://cdmd.cnki.com.cn/Article/CDMD-11906-1012302981.htm

31. Zhang YL, Cao XP, Cai LY, et al. Zhengzhou Daxue Xuebao: Yixueban. 2009;44（4）：748-750.张月兰，曹选平，蔡留意，等. 国产微螺钉种植体支抗即刻负载的稳定性观察[J]. 郑州大学学报：医学版，2009，44（4）：748-750.http://www.cqvip.com/QK/90002A/200904/31374304.html

32. Ding X, Zhu XH, Liao SH, et al. Yiyong Shengwu Lixue. 2009;24（4）：295-299.丁熙，朱形好，廖胜辉, 等. 种植体长度对即刻负载种植体骨界面生物力学分布的影响[J]. 医用生物力学，2009，24（4）：295-299.http://www.cqvip.com/Main/Detail.aspx?id=31562077

[1]	Huang Xiang-wang, Liu Hong-zhe. A new low elastic modulus of beta titanium alloy Ti2448 spinal pedicle screw fixation affects thoracic stability: biomechanical analysis [J]. Chinese Journal of Tissue Engineering Research, 2017, 21(7): 1031-1035.
[2]	Li Hui, Ma Jun-yi, Ma Yuan, Zhu Xu . Establishment of a three-dimensional finite element model of ankylosing spondylitis kyphosis [J]. Chinese Journal of Tissue Engineering Research, 2017, 21(7): 1069-1073.
[3]	Yao Yu, Xue Hua-wei, Zhao Jian, Zhang Feng, Cao Yong, Chen Xiang-dong, Zhao Jin-long, Jiang Xing-jie. Biomechanics of lumbar cortical bone trajectory screw fixation [J]. Chinese Journal of Tissue Engineering Research, 2017, 21(3): 362-366.
[4]	Du Shi-yao, Zhou Feng-jin, Ni Bin, Chen Bo, Chen Jin-shui. Finite-element analysis of a novel posterior atlantoaxial restricted non-fusion fixation system [J]. Chinese Journal of Tissue Engineering Research, 2017, 21(3): 383-389.
[5]	Liu Jun, Liao Su-ping. Three-dimensional finite element analysis of Kirschner nails and external fixation for Bennett fracture [J]. Chinese Journal of Tissue Engineering Research, 2017, 21(3): 390-395.
[6]	Zhang Li-chao, Zhang Li-min, Lv Yong-ming, Wang Zhi-hui, Yang Yang, Xu Fei, Dai Hai-feng, Li Jia, Cao Xiang-yu, Wu Li-zhu. Finite element analysis of knee flexion and extension movement [J]. Chinese Journal of Tissue Engineering Research, 2017, 21(3): 396-400.
[7]	Jia Jin-ling, Dong Yu-zhen. Finite element analysis of prosthesis position during hip arthroplasty [J]. Chinese Journal of Tissue Engineering Research, 2017, 21(3): 401-405.
[8]	Ma Yong, Sikandaer•Siyiti, Ou Yong, Aikeremujiang•Muheremu, Ma Yuan. Finite element analysis of kyphosis in ankylosing spondylitis treated by different osteotomy methods [J]. Chinese Journal of Tissue Engineering Research, 2017, 21(19): 3038-3043.
[9]	Li Xin, Tang Jing, Li Ze-kui, Li Hong-fa, Liang Meng, Zhang Juan. Age-related changes in condyle evaluated by cone-beam CT reconstruction [J]. Chinese Journal of Tissue Engineering Research, 2017, 21(19): 3044-3055.
[10]	Wang Chun-cheng, Li Ming-zhe. Position and biomechanical characteristics of prosthesis in total hip arthroplasty [J]. Chinese Journal of Tissue Engineering Research, 2017, 21(11): 1652-1657.
[11]	Ruan Zhi, A Lu-ti. Design and biomechanical properties of a novel low elastic modulus spine pedicle screw [J]. Chinese Journal of Tissue Engineering Research, 2016, 20(53): 7959-7965.
[12]	Hu Qun-sheng, Jiang Zi-wei, Huang Feng. Finite element analysis of unstable intertrochanteric fracture fixed with triangle proximal femoral nail [J]. Chinese Journal of Tissue Engineering Research, 2016, 20(48): 7219-7224.
[13]	Song Zuo-cheng, Yan Xiao-long. Biomechanical characteristics of distal tibial articular surface defect of the ankle joint: three-dimensional finite element analysis [J]. Chinese Journal of Tissue Engineering Research, 2016, 20(48): 7212-7218.
[14]	Ding Mu-chen, Shi Zhi-cai, Lu Chun-wen, Wu Jin-hui, Wang Chao, Yuan Jia-bin, Zhou Zhen. Lumbosacral sagittal parameters measured by magnetic resonance in association to L₅/S₁ intervertebral disc degeneration [J]. Chinese Journal of Tissue Engineering Research, 2016, 20(48): 7245-7250.
[15]	Yang Bao-jia, Yang Kai-shun, Yao Ru-bin. Correlation of nicotine dose and lumbar posterolateral fusion rate: imaging and biomechanical testing [J]. Chinese Journal of Tissue Engineering Research, 2016, 20(48): 7251-7260.