Table of Content

25 March 2016, Volume 20 Issue 13 Previous Issue    Next Issue

For Selected:

Download Citations EndNote Reference Manager ProCite BibTeX RefWorks

Toggle Thumbnails

Select

Safety, economy and effects of unilateral and simultaneous bilateral knee arthroplasty Liu Yuan-kun, Yin Zong-sheng 2016, 20 (13):  1829-1837.  doi: 10.3969/j.issn.2095-4344.2016.13.001 Abstract ( 461 )   PDF (527KB) ( 348 )   Save BACKGROUND: Patients with knee arthroplasty mostly had bilateral lesions. It is still controversial to perform simultaneous bilateral surgery or unilateral arthroplasty. The focus of controversy is that bilateral arthroplasty of the same period can get a real upgrade of the repair effect if it does not increase the risk of surgery. There have always existed controversies. OBJECTIVE: To comparatively analyze simultaneous bilateral and unilateral arthroplasty from aspects of safety, economy and effects. METHODS: 118 patients suffering from severe bilateral knee osteoarthritis and treated by total knee arthroplasty in the First Affiliated Hospital of Anhui Medical University from April 2011 to April 2014 were divided into simultaneous bilateral arthroplasty group (n=47) and unilateral arthroplasty group (n=71). Variables reflecting safety, economy and effects were set up and data were collected and analyzed. RESULTS AND CONCLUSION: There was no evident difference in safety between simultaneous bilateral arthroplasty and unilateral arthroplasty groups (P > 0.05). In economy and effect, simultaneous bilateral arthroplasty group was significantly better than unilateral arthroplasty group (P < 0.05). These results suggest that with the same surgical management level, if the patient could resist, simultaneous bilateral surgery should be more welcomed, while performing simultaneous bilateral surgery in patients with preoperative cardiovascular diseases should be decided carefully. Patients with diabetes mellitus preoperatively should be guarded against postoperative infection.  中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程   Figures and Tables | References | Related Articles | Metrics

Select

Axial rotation alignment of the femoral prosthesis in total knee arthroplasty and biological effect of patellofemoral joint Yang Jun 2016, 20 (13):  1838-1844.  doi: 10.3969/j.issn.2095-4344.2016.13.002 Abstract ( 434 )   PDF (448KB) ( 412 )   Save BACKGROUND: Total knee arthroplasty needs to use the femoral prosthesis. The prosthesis will produce a certain axial rotation on the line, and affect the biological properties of the patellofemoral joint. OBJECTIVE: To explore the effect of axial rotation of prosthesis on biological effect of the patellofemoral joint in total knee arthroplasty.  METHODS: Ten fresh human cadaver knees were obtained from the Specimen Room of Second Affiliated Hospital (Henan Province Hospital of Traditional Chinese Medicine) of Henan University of Traditional Chinese Medicine. Knee joint experimental platform was established to simulate the human ankle and hip joint, providing 3 degrees of freedom of tibia and 2 degrees of freedom of femur. Femoral component rotation angle was measured. Total knee arthroplasty was conducted. The sensitive pressure-sensitive film was used to measure the transepicondylar axis rotation of 2°, 2° through the femoral epicondylar axis rotation, the femoral epicondylar axis rotation of 4°, and parallel to the femoral epicondylar axis, external rotation of the femoral epicondylar axis 4°, and the patellofemoral contact pressure and patellofemoral contact area parallel with Whiteside’s line. RESULTS AND CONCLUSION: The peak contact pressure inside and outside the joint at different axial rotation of the femoral prosthesis paralleled with femoral epicondylar axis was in a balanced state, and significant differences were detected as compared with other rotation manners (P < 0.05). No significant difference was found in patellofemoral contact area at different directions. These findings suggest that femoral prosthesis axial rotation on the line in total knee arthroplasty will have a certain effect on biological properties of patellofemoral joint. The peak contact pressure inside and outside patellofemoral joint in the parallel state of the femoral epicondylar axis does not appear excessive low or high state on one side, but in a balanced state. It can be chosen as a reference standard of rotational alignment of the femoral prosthesis during the operation.   中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程 Figures and Tables | References | Related Articles | Metrics

Select

Effects of joint line changes on biomechanics of patellofemoral joint after total knee arthroplasty Wang Tao 2016, 20 (13):  1845-1851.  doi: 10.3969/j.issn.2095-4344.2016.13.003 Abstract ( 394 )   PDF (408KB) ( 470 )   Save BACKGROUND: In addition to infection, the reasons for total knee arthroplasty revision are polyethylene liner wear and prosthesis loosening. The impact of joint line height on patellofemoral biomechanics was inconclusive. OBJECTIVE: To study the impact of joint line changes after total knee arthroplasty on patellofemoral joint biomechanics. METHODS: Three-dimensional finite element models were established after total knee arthroplasty. The impact of different joint line height on quadriceps tensile force, patella tendon tension, and patellofemoral joint forces was calculated at range of flexion of 0°, 30°, 60° and 90°.  RESULTS AND CONCLUSION: (1) At knee flexion of 0°, the height of the joint line in -3 mm-4.5 mm did not have great impacts on quadriceps tensile force, patella tendon tension and patellofemoral joint forces. (2) At knee flexion of 30°-90°, the height of the joint line below 3 mm did not have great impacts on quadriceps tensile force, patella tendon tension and patellofemoral joint forces. The height of the joint line more than 3 mm had obvious impacts on quadriceps tensile force, patella tendon tension and patellofemoral joint forces. (3) It was recommended that the height of joint line in total knee arthroplasty was preferably controlled within 3 mm.  中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程   Figures and Tables | References | Related Articles | Metrics

Select

Effects of early drainage tube occlusion on blood loss after total knee arthroplasty Fu Zhi-qiang, Xia Chang-suo, Li Zhi-jie, Jiang Tao, Zhang Cai-long 2016, 20 (13):  1852-1858.  doi: 10.3969/j.issn.2095-4344.2016.13.004 Abstract ( 423 )   PDF (465KB) ( 741 )   Save BACKGROUND: Artificial knee joint replacement in older patients often combines with basic diseases, such as hypertension and diabetes. Perioperative blood loss is an important factor affecting the safety of replacement. OBJECTIVE: To explore the effect of the early closure of drainage tube on blood loss after primary total knee arthroplasty. METHODS: We randomly selected 90 patients with osteoarthritis of the knee who underwent primary total knee arthroplasty in the Affiliated Hospital of Qingdao University from January 2014 to July 2015. The patients were randomly divided into three groups (n=30). In the 4-hour occlusion group, the drainage tube was closed for 4 hours in early stage of replacement. In the 2-hour occlusion group, the drainage tube was closed for 2 hours in early stage of replacement. In the control group, the drainage tube was not closed. Because of the use of tourniquet during surgery, the amount of intraoperative blood loss was considered as 0 mL. Drainage blood loss after surgery was recorded. Total blood loss was calculated according to Gross formula through patient height, weight and preoperative and postoperative hematocrit. Hidden blood loss was gotten by subtracting the visible blood loss from total loss. Under the observation of postoperative joint swelling and subcutaneous ecchymosis, knee Hospital for Special Surgery score was recorded at 6 weeks after replacement, and compared among groups. RESULTS AND CONCLUSION: Statistical analysis indicated that significant differences in total blood loss and dominant blood loss were detected among the three groups (P < 0.05), indicating that both occlusion for 2 hours and 4 hours could reduce total blood loss and dominant blood loss, but the range of reduction was greater in occlusion for 4 hours. At 6 months after replacement, no significant difference in knee Hospital for Special Surgery score and hidden blood loss was detectable among three groups (P > 0.05). The incidence of joint swelling and subcutaneous ecchymosis was increased in the 4-hour occlusion group (P < 0.05). Above results confirmed that drainage tube occlusion can decrease total blood loss and dominant blood loss after total knee arthroplasty, but cannot reduce hidden blood loss. 2-hour occlusion after total knee arthroplasty is an ideal choice, but the amount of hidden blood loss should be carefully considered.    中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程   Figures and Tables | References | Related Articles | Metrics

Select

Application of cemented and cementless femoral prosthesis in hemiarthroplasty for patients with osteoporosis Shi Feng, Li Peng, Madeven Periacarpen, Zheng Lian-jie, Yang Liang, Liu Gang, Brian Ayuka, Ni Shuo, Li Peng-sheng 2016, 20 (13):  1859-1865.  doi: 10.3969/j.issn.2095-4344.2016.13.005 Abstract ( 569 )   PDF (550KB) ( 443 )   Save BACKGROUND: Hemiarthroplasty is a proven method for reconstruction of the hip joint function, especially for the elderly patients who cannot tolerate the total hip arthroplasty. However, for the patients with osteoporosis, there are still more controversial in clinical practice about using cemented or cementless femoral prosthesis for hemiarthroplasty. OBJECTIVE: To observe the repair effect of cemented or cementless femoral prosthesis when were used for hemiarthroplasty in patients with osteoporosis. METHODS: The clinical data from 105 patients treated with hemiarthroplasty were retrospectively analyzed. Osteoporosis was diagnosed in these patients using the dual energy X-ray absorptiometry before surgery.Patients were divided into bone cement group (n=56) and cementless group (n=49) depending on different types of femoral stem prosthesis. The difference of efficacy between cemented or cementless femoral prosthesis when were used for hemiarthroplasty in patients with osteoporosis was analyzed by comparing the operative time, volume of drainage, post-operative Harris scores of hip joint function and radiographic assessment (prosthesis subsidence, osteolysis, severe stress shielding, heterotopic ossification) during the follow-up after the replacement. RESULTS AND CONCLUSION: In the process of hemiarthroplasty in patients with osteoporosis, the operative time in the cement group was significantly longer than that in the cementless group (P < 0.05). However, there was no significant difference in the postoperative volume of drainage between these two groups (P > 0.05). At the 1, 3, 6 and 12 of follow-up after replacement, there were no significant differences in the Harris score of hip joint function, total effective rate and radiographic assessment between these two groups (P > 0.05). These results suggest that in the process of hemiarthroplasty in patients with osteoporosis, the clinical efficacy of cementless femoral prosthesis is similar to the cement femoral prosthesis, therefore two prostheses can all be selected; however, the operative time of the cement femoral prosthesis is longer than the cementless femoral prosthesis, so we can give priority to the cementless femoral prosthesis for patients with osteoporosis who can’t tolerate a long operative time because of the poor basic condition.  中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程 Figures and Tables | References | Related Articles | Metrics

Select

Cementation of polyethylene liner into a retained stable cup in the acetabular revision Abudukeremu•Rexiati, Ren Jiang-dong, Asihaerjiang•Maimaitiyiming, Cao Li, Wuhuzi•Wulamu 2016, 20 (13):  1866-1872.  doi: 10.3969/j.issn.2095-4344.2016.13.006 Abstract ( 546 )   PDF (538KB) ( 410 )   Save BACKGROUND: Although cementation of polyethylene liner into a well-fixed metal shell during the revision surgery has several advantages compared to total acetabular revision, there are some disputes about its clinical outcomes, especially regarding the re-revision rate and the prosthetic survivorship. OBJECTIVE: To evaluate the clinical outcomes and safety of cementation of polyethylene liner into a well-fixed acetabular cup in the revision after total hip arthroplasty with retained stable cup. METHODS: Between March 2012 and November 2014, nine patients underwent revision after total hip arthroplasty with cementation of polyethylene liner into a well-fixed acetabular cup. There were 1 male and 8 females, aged 43.7 years on average. The time was 9.4 years on average from the primary total hip arthroplasty to revision. Harris Hip Score and prosthesis X-ray films were compared after revision. The effects and safety of cementation of polyethylene liner into a well-fixed acetabular cup were further evaluated.  RESULTS AND CONCLUSION: Nine patients were followed up for 8-37 months. The Harris hip scores before revision was (49.54±18.28) points previously, and (84.82±10.59) points during final follow-up (t=6.377, P < 0.05). One patient had re-revision surgery because of recurrent dislocation. There were not complications in other patients, resulting in failure rate of 11%. These results indicated that polyethylene liner cementation technique is safe and effective when the well-positioned and well-fixed acetabular cup retained.   中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程 Figures and Tables | References | Related Articles | Metrics

Select

Modified open-door laminoplasty with steel implantation and bilateral semispinalis reduces axial symptoms and the loss of cervical curvature An Zhong-cheng, Cao Rui, Sheng Wei-bin, Liang Wei-dong, Sheng Jun 2016, 20 (13):  1873-1879.  doi: 10.3969/j.issn.2095-4344.2016.13.007 Abstract ( 424 )   PDF (669KB) ( 528 )   Save BACKGROUND: Cervical single-door laminoplasty for chronic compressive myelopathy has obtained exact effects. To reduce the occurrence of related complications, different doctors have proposed different improvement programs, and have achieved a certain effect, but the effect on postoperative complications is not very well. OBJECTIVE: To evaluate the effect of modified open-door laminoplasty with steel implantation and preservation of bilateral semispinalis. METHODS: We retrospectively analyzed the data of 30 cases of multilevel cervical spondyiotic myelopathy who underwent modified open-door laminoplasty from October 2013 to March 2014. Internal fixation material was Centerpiece titanium plate fixation system. Visual Analogue Scale score, Japanese Orthopaedic Association score (17-score method), neck disability index, range of motion of cervical vertebra, and cervical curvature were compared before treatment and during follow-up. Axial symptom severity was assessed after treatment. RESULTS AND CONCLUSION: The patients were followed up for 12-24 months. No complications appeared during repair, including postoperative spinal cord injury, cerebrospinal fluid leakage, infection or C5 nerve root palsy. Only one patient suffered from axial pain, but there was no need for oral medication. The improvement rate of Japanese Orthopaedic Association score was (76.96±17.61)%. Neck disability index decreased from 12.29±3.82 preoperatively to 8.24±2.86 in final follow-up. Range of motion of cervical vertebra (47.41±17.33)° in final follow-up, accounting for (93.0±4.2)% of preoperative data. Cervical curvature decreased from (13.47±10.54)° preoperatively to (12.88±8.56)° in final follow-up. These findings confirm that modified open-door laminoplasty with preservation of bilateral semispinalis can reserve cervical rear structure to maximum extent, is conducive to early functional exercise after rehabilitation, and reduces the incidence of axial symptoms and loss of cervical curvature.   中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程 Figures and Tables | References | Related Articles | Metrics

Select

Metal implant fixation and repair for fresh unstable distal radial fractures with scaphoid fracture: half-year follow-up Gao Jin-wei, Wu Dou 2016, 20 (13):  1880-1887.  doi: 10.3969/j.issn.2095-4344.2016.13.008 Abstract ( 532 )   PDF (557KB) ( 385 )   Save BACKGROUND: Healing time and plaster used in fixed position and fixed time are different between distal radius fractures and scaphoid fracture. When both fractures occur simultaneously, you cannot choose a fixed position and determine a fixed time. One-stage internal fixation for the distal radial fractures and scaphoid fractures simultaneously can obtain a good function.  OBJECTIVE: To retrospectively analyze the effects of titanium locking compression plate and Herbert screw fixation for fresh unstable distal radial fractures with scaphoid fracture. METHODS: A total of 12 patients with fresh unstable distal radial fractures combined with scaphoid fracture were treated in the Shanxi Dayi Hospital from November 2011 to June 2014. All cases received open reduction and locking compression plate fixation of the distal radius, open reduction of scaphoid fracture or percutaneous Herbert screw fixation. Fracture healing was observed during follow-up. At 6 months after treatment, wrist joint function was evaluated with modified McBride score. Range of motion of palmar flexion, dorsiflexion, ulnar deviation, radial deviation, pronation and supination and grip strength were measured. The distal radial shortening (difference in height of styloid process of radius and ulna), and angles of ulnar deviation and palmar tilt were measured with X-ray films. The data of healthy side and affected side were compared. RESULTS AND CONCLUSION: (1) 12 cases were followed up for 6-24 months. (2) The distal radius and scaphoid fractures healed. The healing time of distal radius was 6-12 weeks, with an average of seven weeks. Healing time of scaphoid fracture was 3-6 months, with an average of 4.2 months. (3) Wrist score was evaluated using modified McBride scoring criteria at 6 months after treatment. There were excellent in 5 cases, good in 6 cases, and average in 1 case, with the excellent and good rate of 92%. (4) No significant difference in range of motion of palmar flexion, dorsiflexion, ulnar deviation, radial deviation, pronation and supination and grip strength, angles of ulnar deviation and palmar tilt, difference in height of styloid process of radius and ulna and modified McBride score was detected between healthy side and affected side (P > 0.05). (5) The median nerve injury in two patients was recovered within 6 months after postoperative exploration decompression. No complications appeared, such as infection, dorsal muscle tendon irritation symptoms, carpal tunnel syndrome, and internal fixation failure. (6) These findings confirm that fresh unstable distal radial fractures with scaphoid fractures can be treated with open reduction of the distal radius and locking plate fixation, open reduction of scaphoid bone or percutaneous Herbert screw fixation, with reliable fixation, high fracture healing rate, and good wrist function recovery rate; the repair effect is satisfactory.  中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程   Figures and Tables | References | Related Articles | Metrics

Select

Biocompatibility of titanium alloy implant fixation for aged patients with distal humeral fractures Hu Wen-xiong, Guo Xiang 2016, 20 (13):  1888-1894.  doi: 10.3969/j.issn.2095-4344.2016.13.009 Abstract ( 310 )   PDF (587KB) ( 426 )   Save BACKGROUND: Fracture of the distal humerus is a common type of fracture. Conservative treatment or metal implant fixation can be used during the clinical treatment of elderly patients, but the choice of specific treatment options still lacks of clear conclusion. OBJECTIVE: To explore the clinical repair effect and biocompatibility of titanium alloy implant internal fixation for aged patients with distal humeral fractures. METHODS: A total of 41 elderly patients with humeral fractures, who were hospitalized in Danzhou Municipal First People’s Hospital from July 2011 to July 2014, were enrolled in this study. In accordance with the wishes of patients, repair program was selected. 22 patients in the control group received conservative treatment. 19 patients in the observation group received titanium alloy implant fixation. After 12 months of follow-up, elbow joint activity, elbow joint function recovery and adverse reactions were observed and compared in the two groups. RESULTS AND CONCLUSION: After conservative treatment and internal fixation, each index score and total score of range of motion of shoulder joint were significantly higher in the two groups as compared with pre-treatment (P < 0.05). Each index score and total score were significantly higher in the observation group than in the control group (P < 0.05). Curative effect evaluation results showed four excellent patients and three good patients in the control group, eight excellent patients and four good patients in the observation group. The excellent and good rate was significantly lower in the control group than in the observation group (P < 0.05). Two patients suffered from mild inflammatory hyperplasia during taking out the fixator in the observation group, and the remaining patients did not affect inflammatory hyperplasia or capsular tissue. In the observation group, after surgery, one case experienced numbness of the ulnar nerve, which disappeared after treatment with trophic nerve. One case suffered from wound infection, which was controlled by antibiotic treatment, and did not induce a serious outcome. After follow-up, none of them had nonunion or internal fixation loosening. The results show that titanium alloy implant fixation for the treatment of distal humerus fractures can get better repair effect compared with conservative treatment, can effectively improve the elbow joint function, and titanium alloy material has good biocompatibility.  中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程   Figures and Tables | References | Related Articles | Metrics

Select

Digital design of standard parts database for distal femoral fractures treated with plating via three-dimensional printing Wu Chang-fu, Zheng Zu-gao, Chen Xuan-huang, Yu Zheng-xi, Zhang Guo-dong, Chen Xu, Lin Hai-bin, Wu Xian-wei, Gao Xiao-qiang 2016, 20 (13):  1895-1903.  doi: 10.3969/j.issn.2095-4344.2016.13.010 Abstract ( 347 )   PDF (835KB) ( 624 )   Save BACKGROUND: On CT reconstruction of three-dimensional (3D) model, fracture virtual reduction and internal fixation cannot be achieved, and reasonable operation scheme cannot be formulated. Digital design can fully meet the needs of clinical orthopedics physicians. Standard parts database can provide the possibility to choose the ideal internal fixation. 3D printing makes the reasonable operation scheme accurate in clinical implementation. OBJECTIVE: To discuss the feasibility, accuracy and minimal invasion of internal fixation in treatment of the distal femoral fracture with digital design of standard parts database by 3D printing. METHODS: (1) Nine adult lower extremity specimens were selected to take continuously thin-layer CT scanning. After Dicom images were imported into the mimics software, the model was established. According to the AO classification, they were classified into A1-3, B1-3 and C1-3 types of distal femoral fracture by virtual design. Internal fixation with plate and screw formed standard parts database virtually. It was printed out the pilot hole of the navigation module design by three-dimensional printing forming technique. Plate and screw were inserted assisted by the module. X-ray and CT scan were taken postoperatively to access the position. (2) 30 patients with distal femoral fracture were subjected to above fixation. The operation time, intraoperative blood loss and postoperative drainage were recorded. Imaging and curative effects were evaluated during follow-up. RESULTS AND CONCLUSION: (1) Nine samples underwent X-ray and CT scan. 3D reconstruction results revealed plate position, screw entry point, nail direction, length and diameter were consistent with presetting data in Mimics software. The navigation models were designed to fit the lateral bony structure of distal femur. There were good fitting degree, good card position and good stability when the navigation was applied. It could guide plant and screw implantation. (2) In 30 cases, the operation time was (104.63±26.12) minutes, intraoperative blood loss was (121.74±11.49) mL, and postoperative drainage volume was (30.29±6.38) mL. All patients were followed up. According to Schagzker criterion, the efficiency of 22 cases was excellent, 6 cases good and 2 cases average, and the excellent and good rate was 93%. The parameters of length, diameter, orientation and angle were consistent with that preoperatively. (3) Internal fixation formed by standard parts database assisted by 3D printing navigation model has advantages of high accuracy, short process, lessened blood loss, high safety, less complications, and precise fixation. Digital design of standard parts database via 3D printing navigation module is expected to achieve implant navigation and application.   中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程 Figures and Tables | References | Related Articles | Metrics

Select

Auxiliary application of three-dimensional printing technology of implant fixation for tibial plateau fracture Yang Long, Wang Jian-ji, Sun Qi, Li Jing, Zhang Jun-biao, Ma Min-xian, Li Jiang-wei, Ye Chuan 2016, 20 (13):  1904-1910.  doi: 10.3969/j.issn.2095-4344.2016.13.011 Abstract ( 388 )   PDF (606KB) ( 939 )   Save BACKGROUND: In the treatment of tibial plateau fractures, because of the variety of fracture, the complexity of anatomical changes, X-ray films or three-dimensional CT scan limited by two-dimensional plane, increases the difficulty in preoperative plan and surgical treatment. The application of three-dimensional (3D) printing technology has attracted attention in the department of orthopedics. OBJECTIVE: To explore the auxiliary role of 3D printing technique in preoperative plan and treatment for tibial plateau fractures. METHODS: Thirty patients with tibial plateau comminuted fractures were enrolled in this study and divided into two groups: experimental and control groups, with 15 patients in each group. In the experimental group, patients underwent 3D CT scan, which was stored in DICOM format, and processed by Mimics software. Data were converted into STL format, entered 3D printer, and a 1:1 entity size of the fracture model was made, in accordance with repair plan of 3D fracture model. Operation time and intraoperative blood loss were compared between the two groups. At 12 months after treatment, their outcomes were assessed using Rasmussen evaluation criteria. RESULTS AND CONCLUSION: The 3D printing fracture models of 1:1 ratio identified fracture type and made a repair program before surgery in the experimental group. Operation time and intraoperative blood loss were significantly less in the experimental group than in the control group (P < 0.05). After surgery, patients were followed up for 12 to 18 months. The healing time was 3-5 months, averagely 4.3 months. At 12 months after treatment, the Rasmussen evaluation criteria results showed that the excellent and good rate was significantly higher in the experimental group than in the control group (P < 0.05). These results suggest that the fracture model of 3D can help to make the operation plan. The treatment of tibial plateau fractures is more precise, personalized and visual.  中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程   Figures and Tables | References | Related Articles | Metrics

Select

Different fixation methods for transverse acetabular fracture: a finite element analysis Zhou Jian-feng, Li Jian-tao, Zhang Hao, Li Chen, Yin Peng, Li Zhi-rui, Chen Yu-xiang, Tang Pei-fu, Zhang Li-hai 2016, 20 (13):  1911-1917.  doi: 10.3969/j.issn.2095-4344.2016.13.012 Abstract ( 437 )   PDF (449KB) ( 399 )   Save BACKGROUND: Transverse acetabular fracture often involves the damage of anterior and posterior columns of acetabulum. The most popular fixation of the anterior and posterior columns needs the combined anterior and posterior approach. Big trauma is not conducive to patient’s recovery after surgery. Limited incision or percutaneous minimally invasive lag screw placement can reduce soft tissue injuries, but the strength of the fixation lacks of biomechanical verification. OBJECTIVE: To compare different types of fixations for transverse acetabular fracture, explore the appropriate fixation options that can achieve effective fixation and reduce tissue injury by combing with repair approach and the condition of soft tissue.  METHODS: The fourth generation of synthetic semi-pelvic sawbones was set as a template to establish a model of acetabular transverse fracture using finite element analysis. Five different fixation options were used to fix the transverse acetabular fracture. The magnitudes of anterior and posterior displacement of transverse fracture were compared to assess the stability of different options under a simulated condition of incomplete weight bearing stand. RESULTS AND CONCLUSION: The motion at anterior column was minimal when fixed by anterior column locking plate + posterior column screw and the minimum displacement at posterior column was the fixation of anterior column screw + posterior column locking plate. Both of the motions of these two fixations were less than the reconstruction plate fixation respectively. The worst fixation was the anterior column and posterior column lag screw fixation with the largest displacement. The anterior column locking plate + posterior column screw, accomplished by single approach, could not only reduce surgical trauma, but also has a stronger stability. Moreover, this fixation option is effective method to place posterior column lag screw under direct vision and reduce the difficulty of screw implantation.   中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程   Figures and Tables | References | Related Articles | Metrics

Select

Digital orthopedics technology in preoperative planning of implant fixation for intertrochanteric fracture Miao Xin, Deng Gao-rong, Ling Qiang 2016, 20 (13):  1918-1924.  doi: 10.3969/j.issn.2095-4344.2016.13.013 Abstract ( 399 )   PDF (568KB) ( 442 )   Save BACKGROUND: Intertrochanteric fractures can be generally treated by surgical treatment. Along with deep research on the biomechanics of the proximal femur, proximal femoral locking compression plate appears recently. The locking plate fixation is not strong, can reduce the local stress shielding, and maintain optimal system stability, but fracture fixation failure often occurs due to the inappropriate choice of nail plate.  OBJECTIVE: To evaluate the value of digital orthopedics technology in preoperative planning in locking plate fixation for intertrochanteric fracture. METHODS: Forty intertrochanteric fracture patients receiving CT tomography femur upper segment were selected and divided into two groups. In the conventional group, after reading X-ray films and CT images, patients received locking plate fixation. In the computer planning group, before repair, fracture model was established using Mimics software to segment fracture fragments, simulate operation reset and 3-matic software was used to reconstruct locking plate and screws. Locking plate was assembled with Mimics to obtain the best plate position, best screw angle and screw length. Proximal femoral locking compression plate fixation was performed. Fluoroscopy times, operation time, blood loss and fracture healing time were compared in both groups. RESULTS AND CONCLUSION: Three-dimensional models of proximal femur were reconstructed, and a series of data were obtained. The optimal position of each plate was obtained from each patient. The screw length was predicted, so preoperative operation planning was realized. All patients were followed up for 6-20 months. Fluoroscopy times, operation time, and blood loss were significantly less in the computer planning group than in the conventional group (P < 0.05). No significant difference in fracture healing time was detected between the two groups (P > 0.05). These findings suggest that digital orthopedics technology used in intertrochanteric fracture can simulate the locking plate position, determine the screw placement angle and length of the screw in advance, and reduce fluoroscopy times, operation time, blood loss and screw position misalignment.   中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程   Figures and Tables | References | Related Articles | Metrics

Select

Biomechanical properties of thoracic spine with various locations of metastatic defects: three-dimensional finite element analysis Jiang Wei-hao, Su Xiu-yun, Liu Yao-sheng, Wang Cheng, Liu Shu-bin 2016, 20 (13):  1925-1931.  doi: 10.3969/j.issn.2095-4344.2016.13.014 Abstract ( 420 )   PDF (782KB) ( 430 )   Save BACKGROUND: The spinal column is the most common site of cancer metastases. Most of the previous biomechanical experiments utilized models with defects only in the vertebral body or posterior elements, but the biomechanical changes of the thoracic vertebrae and posterior part with various locations of metastasis deserve further research. OBJECTIVE: To set up the three-dimensional (3D) finite element model to investigate biomechanical effects by simulating combined destruction of vertebral body and other posterior components. METHODS: Based on CT data, we constructed the 3D geometric models of the thoracic vertebrae (T9-11), including intervertebral discs, ligaments and ribs using the Mimics software. The 3D models of T9 vertebra and different parts of the posterior thoracic vertebrae related with the metastasis could be simulated, including the control group with the intact vertebrae, the group of the T10 vertebrae with the right defective hemi-vertebrae, the group of the defective hemi-vertebrae with the defective ipsilateral pedicle, the group of the defective hemi-vertebrae with the defective ipsilateral costovertebral joint, the group of the defective hemi-vertebrae with the defective ipsilateral pedicle and costovertebral joint, the group of the defective hemi-vertebrae with the defective ipsilateral pedicle, costovertebral joint and transverse process. The corresponding 3D finite element models were established using the Abaqus software. The displacement and Von Mises stress distribution of the models were analyzed when the anterior compressive flexure load was applied. RESULTS AND CONCLUSION: When the anterior compressive flexure load was applied, the entire stiffness was proportionally decreased when the more posterior parts destroyed, especially destruction of vertebral body and pedicle significantly decreased. The destruction of posterior structures such as the thoracic rib joints and transverse processes was not great. However, the maximal Von Mises stress increased significantly when the vertebral body and pedicle were destructed, but additional costovertebral joint destruction slightly decreased the maximal Von Mises stress because of the stress was re-distributed.   中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程   Figures and Tables | References | Related Articles | Metrics

Select

Biomechanical characteristics of lumbar vertebra fixation based on finite element analysis Tao Yong, Wu Yun-le, Zong Shao-hui, Li Ke-ke, Du Li, Peng Xiao-ming, Shi Xiong-zhi, Hu Xi-yuan 2016, 20 (13):  1932-1938.  doi: 10.3969/j.issn.2095-4344.2016.13.015 Abstract ( 446 )   PDF (503KB) ( 568 )   Save BACKGROUND: Posterior lamina resection often causes loss of spinal stability, so screw rod internal fixation technology is needed to maintain the stability of lumbar spine. Finite element analysis can be used to simulate the stress distribution of the spine and internal fixation system after spinal surgery. OBJECTIVE: To build three-dimensional finite element model of spinal L1 to L3, analyze the spinal stability and stress distribution after the total laminectomy and insertion of bilateral pedicle screw using finite element method. METHODS: L1-L3 CT data could be collected from an adult healthy male volunteer. Mimics14.01, 3-matic(V6.0) and Ansys 15.0 could be used to set up the intact lumbar spine finite element model of L1-L3 (group A), the L1-L3 finite element model after L2 total laminectomy (group B), and the finite element model of L2 total laminectomy and insertion of bilateral pedicle screw (group C). We used software to simulate flexion, extension, lateral bending and axial rotation, and three kinds of models received finite element analysis. RESULTS AND CONCLUSION: (1) Based on the maximum of Von Mises under different motion states, the maximum stress was significantly lower in group A than in group B (P < 0.05). The maximum stress was significantly lower in group B than in group C (P < 0.05). (2) Based on the total deformation under different motion states, the total deformation was significantly lower in group A than in group B (P < 0.05). The total deformation was significantly lower in group C than in groups A and B (P < 0.05). (3) After the total laminectomy, vertebral body stress increased, especially in the lamina, pedicle and joints. The range of motion of the vertebral body increased, which influenced the stability of the vertebral body. Internal fixation could decrease range of motion. Stress concentrated on the screw. Stress on the vertebral plate and pedicle decreased. The stability of vertebral body increased. Excessive stress concentrated on screw system will increase the risk of screw breakage.  中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程 Figures and Tables | References | Related Articles | Metrics

Select

Different implant fixation repairs femoral neck combined with ipsilateral subtrochanteric fractures: comparisons of biomechanical properties Wang Yan-jun, Hou Jun, Wan Bo, Liu Gang, Niu Gang, Zhang Yang, Dang Xiao-qian 2016, 20 (13):  1939-1945.  doi: 10.3969/j.issn.2095-4344.2016.13.016 Abstract ( 335 )   PDF (468KB) ( 547 )   Save BACKGROUND: Choosing internal fixator implants with good strength and stiffness is the key to repair femoral neck combined with ipsilateral subtrochanteric fractures. OBJECTIVE: To compare the biomechanical properties of different implant fixation for femoral neck combined with ipsilateral subtrochanteric fractures. METHODS: Totally 24 adult antiseptic cadaver specimens were used to produce fracture models with femoral neck fracture combined with 5 cm of ipsilateral subtrochanteri medical cortical defect, and were divided into femoral proximal locking plate group, lengthening proximal femur anti-rotation intramedullary nail group and lengthening proximal femoral nail group according to the random number table method. The results of axial compression test, torsion test and axial compression failure rest in three groups were compared. RESULTS AND CONCLUSION: The axial compressive stiffness and failure load in lengthening proximal femur anti-rotation intramedullary nail group were significantly greater than those in femoral proximal locking plate group and lengthening proximal femoral nail group, and those in lengthening proximal femoral nail group were significantly greater than those in femoral proximal locking plate group (P < 0.05). The torsional stiffness in femoral proximal locking plate group was significantly greater than that in lengthening proximal femur anti-rotation intramedullary nail group and lengthening proximal femoral nail group, and that in lengthening proximal femur anti-rotation intramedullary nail group was significantly greater than that in lengthening proximal femoral nail group (P < 0.05). The indexes of biomechanical properties of specimens at the 4th and 8th weeks after fixation in three groups were slightly increased compared with those in 0 week after surgery, but the difference was no statistically significant (P > 0.05). These results demonstrate that to a certain extent, compared with the femoral proximal locking plate and lengthening lengthening proximal femoral nail, lengthening proximal femur anti-rotation intramedullary nail fixation for repair of femoral neck combined with ipsilateral subtrochanteric fractures has more biomechanical advantages.   中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程   Figures and Tables | References | Related Articles | Metrics

Select

Implant fixation versus conservative treatment for Rockwood type III acromioclavicular dislocation: a systematic review Sun Gen-wen, Ababaiaili•Palati, Li Tao, Su Lai-man, Abudusalamu, Abuduhadeer•Tayier 2016, 20 (13):  1946-1953.  doi: 10.3969/j.issn.2095-4344.2016.13.017 Abstract ( 320 )   PDF (528KB) ( 383 )   Save BACKGROUND: Although there is a general consensus with regard to the treatment of Rockwood types I, II, IV, V and VI injuries, the treatment of type III injury is inconsistent. OBJECTIVE: The aim of this systematic review was to evaluate the efficacy and safety of implant fixation and conservative treatment for Rockwood type III acromioclavicular dislocation. METHODS: Studies were identified from databases (PubMed, Embase, Cochrane Library, China Biological Medicine, VIP, CNKI and Wanfang Database) up to May 2015. Eligible studies that investigated and compared the effectiveness and/or complications of implant fixation and conservative treatment for Rockwood type III acromioclavicular dislocation and provided sufficient data were included. RESULTS AND CONCLUSION: In total, eight studies were included. Implant fixation (n=207) included the Bosworth technique, Clavicle Hook Plate technique, the TightRopeTM system (titanium plate and Arthrex fiber suture), Weaver-Dunn technique (coracoacromial ligament displacement, instead of coracoclavicular ligament fixation), Phemister technique (Kirschner wire fixation) and the use of a poly dioxanone sutures cord. The conservative treatments (n=137) consisted of immobilisation management with a sling, Kenny-Howard brace, or with a sling and clavicle fastening taping tape or a simple brake, or with a sling or tape. There were no significant differences in the Constant score (P=0.90) and infection rate (P=0.07) between the two groups. The rate of satisfaction with aesthetic outcomes was higher in the implant fixation group (P < 0.000 01), although the incidence of coracoclavicular ligament calcification was also higher (P=0.03) in this group. The time to resumption of normal work and normal activities was shorter after conservative treatment than that after implant fixation treatment. However, implant fixation could return to the game faster. These results indicate that both implant fixation and conservative treatments can result in satisfactory levels of shoulder function; however, the rehabilitation time was shorter after conservative treatment. Although implant fixation results in superior aesthetics, the risk of coracoclavicular ligament calcification is higher than that with conservative treatment. Time to resumption of normal work and normal activities was shorter after conservative treatment.   中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程 References | Related Articles | Metrics

Select

A meta-analysis of arthroplasty versus internal fixation in treatment of intertrochanteric fracture in the elderly Sun You-qiang, Shao Min, He Wei, Hu Qun-sheng, Chen Lei-lei, Yu Xiang 2016, 20 (13):  1954-1960.  doi: 10.3969/j.issn.2095-4344.2016.13.018 Abstract ( 366 )   PDF (661KB) ( 345 )   Save BACKGROUND: Intertrochanteric fracture is one of the most common fractures in older adults. The surgical treatment methods include artificial joint replacement (total hip and femoral head replacement) and internal fixation (proximal femoral nail anti-rotation and dynamic hip screw), but there is no clear evidence to evaluate the effect of them.  OBJECTIVE: To compare the effect difference of arthroplasty and internal fixation in the treatment of intertrochanteric fracture in the elderly people. METHODS: We retrieved randomized controlled studies on artificial joint replacement (total hip and femoral head replacement) and internal fixation (proximal femoral nail anti-rotation and dynamic hip screw) in the treatment of intertrochanteric fracture from 1990 to 2015. Meta-analysis was used to compare operation time, intraoperative bleeding volume, one-year postoperative Harris hip scores, and one-year postoperative complication between the arthroplasty and internal fixation. RESULTS AND CONCLUSION: (1) Twenty-one studies were included. (2) Intraoperative bleeding volume and one-year postoperative Harris hip scores were higher in the arthroplasty group than in the internal fixation group. (3) Operation time was similar between the arthroplasty and internal fixation groups. (4) Complication rate was lower in the arthroplasty group than in the internal fixation group. Incidence of complications was closed between the arthroplasty and internal fixation groups. (5) Results suggested that the effect of arthroplasty was better than internal fixation for treating intertrochanteric fracture in the elderly. However, prospective large-sample long-term randomized controlled trials are needed for verification.   中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程   Figures and Tables | References | Related Articles | Metrics

Select

Comparison of minimally invasive percutaneous and conventional open pedicle screw fixation for thoracolumbar fractures: a meta-analysis Xue Wen, Liu Shu-rao, Guan Xiao-li, Wang Zeng-ping, Kang Zhong-ren, Zhou Hui-ru, Liu Lin, Qian Rao-wen 2016, 20 (13):  1961-1969.  doi: 10.3969/j.issn.2095-4344.2016.13.019 Abstract ( 295 )   PDF (580KB) ( 537 )   Save BACKGROUND: Open reduction pedicle screw fixation for thoracolumbar fracture could obtain satisfactory effects, and has been extensively used. However, it has potential risk during and after repair. Minimally invasive percutaneous pedicle screw technique minimizes the trauma and complications of soft tissue. It remains poorly understood which is better minimally invasive percutaneous or conventional open pedicle screw fixation for the repair of thoracolumbar fracture. OBJECTIVE: To perform quality evaluation and meta-analysis on curative effect and postoperative complications of minimally invasive percutaneous and conventional open pedicle screw fixation in the treatment of thoracolumbar fractures. METHODS: A detailed search of several electronic databases, including Cochrane Library, PubMed, WanFang, CNKI, VIP and CBM, was undertaken. Simultaneously, Chinese Journal of Orthopaedics, Chinese Journal of Orthopaedic Trauma, and Chinese Journal of Trauma were checked by hand to identify controlled trials regarding minimally invasive percutaneous and conventional open pedicle screw fixation in the treatment of thoracolumbar fractures published from inception to 2015, and the references of the included studies were checked. According to inclusion and exclusion criteria, references were screened, data were extracted and quality was evaluated by four investigators independently. Meta-analysis was conducted using RevMan 5.2 software. The quality of references of the included controlled trials was assessed with CONSORT statement and some surgery clinical evaluation indexes. RESULTS AND CONCLUSION: We included 28 studies, including 25 randomized controlled trials/quasi-randomized controlled trials and 3 retrospective comparative studies, with 1 285 patients. Meta-analysis results demonstrated that compared with the conventional open pedicle screw, minimally invasive percutaneous pedicle screw fixation could significantly reduce operation time, blood loss, hospital stays, postoperative complication rate and height loss (P < 0.05). No significant difference in postoperative pain grade was detected between them (P > 0.05). These results indicate that minimally invasive percutaneous pedicle screw fixation for thoracolumbar fracture was safe and reliable, had small trauma, less blood loss, rapid recovery, short hospital stay, and less postoperative complications. Nevertheless, methods and results of most studies are not detailed enough. We suggested reporting randomized controlled trials according to related standards in order to improve the report quality and authenticity of randomized controlled trials.   中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程 Figures and Tables | References | Related Articles | Metrics

Select

A meta-analysis of short fusion versus long fusion for degenerative scoliosis Lu Hai-tao, Yuan Feng, Yang Yu-ming, Zhang Jun-wei, Li Zhi-duo, Sheng Xiao-lei 2016, 20 (13):  1970-1976.  doi: 10.3969/j.issn.2095-4344.2016.13.020 Abstract ( 435 )   PDF (588KB) ( 606 )   Save   BACKGROUND: At present, the main purpose of treatment for degenerative scoliosis is to relieve symptoms, surgically correct scoliosis, restore balance and function of the spine, but what kind of techniques is superior has been controversial. OBJECTIVE: To systematically assess the clinical effectiveness and safety of short fusion versus long fusion for degenerative scoliosis. METHODS: The databases such as China National Knowledge Infrastructure, Chinese Biomedical Literature Database, Chinese Scientific Journals Database, WanFang Database, The Cochrane Library, PubMed, and EMbase published before May 2015 were electronically searched to collect the trials about the short fusion versus long fusion for degenerative scoliosis. Meta-analysis was performed by using RevMan 5.3.4 software.  RESULTS AND CONCLUSION: Eleven studies were included, with 533 patients, including 272 cases in the short fusion group and 261 cases in the long fusion group. Meta-analysis results showed that: compare with short fusion group, long fusion group had better improvement of spine Cobb angle (P < 0.000 01) and lordosis angle (P < 0.000 01). No differences were found in the coronal imbalance (P=0.06) and lateral slippage (P=0.24) between the two groups. No significant difference was detected in Japanese Orthopaedic Association score (P=0.93), Visual analogue scale score (P=0.22), and Oswestry Disability Index score (P=0.13) between the two groups. The postoperative complications (P=0.000 6) and the rate of reoperation (P=0.03) were higher in the long fusion group than those in the short fusion group. The incidence of adjacent segment disease has no difference between the two groups (P=0.81). These findings suggest that long fusion is better than short fusion in improvement of the deformity of spine, but incidence of postoperative complications and the rate of reoperation are higher than those in the short fusion group. Comprehensive consideration should be given to the selection of a fixed fusion scheme.   中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程 Figures and Tables | References | Related Articles | Metrics