Chinese Journal of Tissue Engineering Research ›› 2021, Vol. 25 ›› Issue (10): 1517-1521.doi: 10.3969/j.issn.2095-4344.3063

Previous Articles     Next Articles

Micro-morphology and phase of zirconia-based nano-hydroxyapatite functional gradient biomaterials

Wang Qian1, Li Lu2, Shu Jingyuan1, Dong Zhiheng1, Jin Youshi1, Wang Qingshan1    

  1. 1Binzhou Medical University Hospital, Binzhou 256603, Shandong Province, China; 2Dongying District New District Hospital, Dongying 257000, Shandong Province, China 
  • Received:2020-05-11 Revised:2020-05-15 Accepted:2020-06-13 Online:2021-04-08 Published:2020-12-17
  • Contact: Wang Qingshan, Professor, Chief physician, Binzhou Medical University Hospital, Binzhou 256603, Shandong Province, China
  • About author:Wang Qian, Master, Binzhou Medical University Hospital, Binzhou 256603, Shandong Province, China
  • Supported by:
    the Natural Science Foundation of Shandong Province, No. ZR2018LH010

Abstract: BACKGROUND: The successfully prepared zirconia-based nano-hydroxyapatite functional gradient bioceramics has mechanical properties of strong interlayer bonding, high compressive and shear strength, but its biological properties are yet to be studied.
OBJECTIVE: To detect the micro-morphology and phase of the zirconia-based nano-hydroxyapatite functional gradient bioceramics using scanning electron microscope and X-ray diffractometer.
METHODS: Cylindrical zirconia-based nano-hydroxyapatite functional gradient bioceramics were longitudinally sectioned into thin-shaped specimens with turbine handpieces. The profile (intersections of layers) was polished with sandpaper. Its surface micro-morphology and layered structure were observed with a scanning electron microscope after spraying gold. The test piece was ground into a powder in an agate mortar and filtered with gauze. Ceramic powder was sieved with smaller particle size for phase analysis with X-ray diffractometer.
RESULTS AND CONCLUSION: (1) Scanning electron microscopy showed that the gradient layers were tightly bound. The grain volume was basically uniform. There was a small amount of ZrO2 agglomeration. The closer to the surface layer, the higher the nHA content and the uniform small pores. (2) The X-ray diffractometer detected mainly the tetragonal phase ZrO2 and nHA diffraction peaks, and a small amount of β-TCP, α-TCP, CaZrO3 and a small amount of monoclinic phase ZrO2 crystal. (3) The research results indirectly indicate that the surface layer nHA is firmly bonded to the ZrO2 matrix layer under the transition of the gradient layer. ZrO2 based nHA functional gradient biomaterial is a ceramic material with excellent mechanical and biological properties.

Key words: bone">, materials">, zirconia">, nano hydroxyapatite">, functionally gradient materials">, biomaterials">, bioceramics">, X-ray diffraction">, scanning electron microscopy

CLC Number: