中国组织工程研究

中国组织工程研究 ›› 2010, Vol. 14 ›› Issue (17): 3120-3122.doi: 10.3969/j.issn.1673-8225.2010.17.020

• 数字化骨科 digital orthopedics • 上一篇    下一篇

一种新的心电图测量方法与实现

曾垂省1，牟雅华2，辛  颖3，赵志强1，向浏欣1   

  1. 重庆邮电大学，  1生物信息学院，   3校医院，重庆市   400065； 2吉林市第二中心医院，吉林省吉林市 132001
  • 出版日期:2010-04-23 发布日期:2010-04-23
  • 作者简介:曾垂省★，男，1974年生，湖南省邵阳市人，汉族，2004年武汉理工大学毕业，硕士，高级程序员，主要从事生物医学材料、智能医学仪器开发和医学信息处理等研究。 zengchuisheng@163.com
  • 基金资助:

    重庆邮电大学自然科学基金(A2007-32)。

A new method for measuring electrocardiogram and its implement

Zeng Chui-sheng1, Mou Ya-hua2, Xin Ying3, Zhao Zhi-qiang1, Xiang Liu-xin1   

  1. 1 College of Bio-information, Chongqing University of Post & Telecommunication, Chongqing 400065, China; 2 Jilin Second Central Hospital, Jilin 132001, Jilin Province, China; 3Hospital of Chongqing University of Post & Telecommunication, Chongqing   400065, China
  • Online:2010-04-23 Published:2010-04-23
  • About author:Zeng Chui-sheng★, Master, Advanced programmer, College of Bio-information, Chongqing University of Post & Telecommunication, Chongqing 400065, China zengchuisheng@163.com
  • Supported by:

     the Natural Science Foundation of Chongqing University of Post & Telecommunication, No. A2007-32*

PDF

923

被引次数

3

摘要：

背景：现有心电图测量或者依赖于专业医生，或者依靠不够准确的自动识别方法，难以满足检测速度快、测试结果准确以及便于普通百姓应用等需求。
目的：提出一种新的简便易行的心电图测量方法，并探讨其可行性。
方法：采用delphi7.0软件开发平台编程实现算法和测试软件，将心电数据图形或心电图图像显示在屏幕上，用鼠标点击或触屏选取心电图上各波的顶点、启始点、终止点以及J点，测试软件根据点击或触屏信息计算出各波的参数，并作出初步诊断。
结果与结论：心电图波形深度高度、时间、P-R间期、S-T段、Q-T段、P-P或R-R时间以及心电轴等参数测量准确，心率、心律和心电轴偏转诊断无误。提示该方法简单易学、实施便捷、高效准确快速，可明显改善专业医生的测量分析效率，并满足一般医生甚至普通老百姓的应用要求。

关键词: 电子心电图, 测量方法, 波形参数, 心电轴, delphi7.0

Abstract:

BACKGROUND: The existing electrocardiogram (ECG) measurement strongly depends on medical professionals and inefficient high-intensity, or relies on automatic identification method which is not accurately enough. Thus, this is difficult to meet high-speed testing, accurate results and ease application for common people.
OBJECTIVE: To develop a new method that was simple and efficient to apply and very easy to learn.
METHODS: Algorithms were programmed and test software was developed by delphi7.0. ECG was drawn on screen. The apex, the starting point and the ending point as well as the J-point of each ECG wave were clicked by mouse or stylus. Then the wave parameters and an initial diagnosis could be quickly obtained by test software.
RESULTS AND CONCLUSION: The parameters of ECG waveform such as wave height, wave time, PR interval, ST segment, QT segment, PP/RR time, cardiac electrical axis and so on could be accurately measured, and heart rate, heart rhythm and the deflection of cardiac electrical axis could be diagnosed correctly. The method was simple to learn and easy to imply, and it was also efficient, quick and accurate. Thus, it could greatly improve the efficiency of measurement and analysis for specialists, and could meet application requirements of general medicals and ordinary people.

中图分类号: